Alcatel Unleashed

Hi All Thank you for the responses... Escalated this issue to ALE support. They logged in and verified that the OXO actually sends the Authentication required but the issue is with the Huawei switch which seems not to act on this. Attached is a trace and UDP trace showing this. I have relayed this b...

Hi Torsten

Please find attached a wireshark trace of a call attempt to two numbers.

Hi mgoegel. Thanks for the response but i have no realm defined. The challenge i have is that the OXO does not send a Re-Invite WITH AUTHENTICATION after the SIP SERVER(SIP SERVICE PROVIDER) respond with a SIP/2.0 407 Proxy Authentication Required. This is the response from the SIP SERVER(PROVIDER) ...

Hi to all. I have a challenge with SIP on the OXO when registered to a Huawei Switch. It registers OK but fails to make any calls. On looking at the traces i find that any invite message sent to the SIP Switch gets an SIP/2.0 407 Proxy Authentication Required and fails to Re-invite with authenticati...

Hi All

Thank you all for your helpful assistance. We finally nailed this problem to be a license issue as the site had no "SIP Integrated license" and have relayed this back to ALE for re-licensing. Will update when issue is resolved.

Thanks again to all.

Kind regards

mavuruse

Question number 1 about routing number - System - what Network number declared? By default 0. If in System declared Network=0, Node=1 - you have wrong Routing number. Node number/ABC-F TG=14 declared in prefix - if network number in prefix and System the same (f.e. 0) - PBX want to reach Node 14 No...

Hi Vad

Noted .Will go site and implement these changes and then update....

The configuration of the OXE is as below screenhots attachment

Some questions: 1 - calls from OXO to OXE - work (in another words - SIP in general works in OXO and OXE?)? 2 - Routing number - explain your management - you have prefix "Routing number" - "another network" (different from OXE network declared in System) f.e. 7, " TG numbe...

cavagnaro wrote:Sip trunks are as F? Or as HS?

Enviado de meu E6633 usando Tapatalk

All SIP trunks are F