Search found 33 matches

by ydeschoe
15 Nov 2016, 09:05
Forum: OmniSwitch 6800
Topic: qos policy configuration
Replies: 0
Views: 1515

qos policy configuration

Gents, I'm setting up a qos policy to allow access to the mgmt ip address from the swicth from a certain ip address and this limited to some specified ip service ports, at the same time for all other devices I deny the communication for all the specified services policy network group mgmt-pc x.x.x.x...
by ydeschoe
09 Aug 2016, 10:33
Forum: OmniSwitch 10k
Topic: TCPDUMP
Replies: 2
Views: 1669

Re: TCPDUMP

nobody any experience on the usage of tcpdump onto the 10K switches

I have already tried to take a dump via the Super User screen but I only see my own traffic which is going to the mgmt session of the switch, no other traffic is seen.
by ydeschoe
20 Jul 2016, 11:12
Forum: OmniSwitch 10k
Topic: TCPDUMP
Replies: 2
Views: 1669

TCPDUMP

Gents, I've been requested to do a TCPDUMP onto the default gateway of our network, this gateway is one of our 10KVC switches has anyone some experience with this on 10K switches and what is the procedure to do this. has this any impact onto the performance of the system and will this impact any tra...
by ydeschoe
10 Dec 2015, 08:53
Forum: OmniSwitch 10k
Topic: mac address policy rule
Replies: 2
Views: 1012

mac address policy rule

Gents, We have a duplicate ip address running at this moment and we would like to have the unknown host blocked so that he is not able to send any traffic anymore. This can be done by the means of a policy Is the bellow correct policy condition source1 source_mac 00:9c:02:73:35:9d policy action sour...
by ydeschoe
05 Nov 2014, 07:06
Forum: OmniSwitch 10k
Topic: Virtual Switch on 10K switches
Replies: 13
Views: 3086

Re: Virtual Switch on 10K switches

JCBelmonte answers to your questions Did you set up RCD? Yes. Did you have specific pbs on L2 ? L3 ? currently we are running the 10Ks as the default gateways for our server VLAN's and no problem seem, OSPF is also configured Do you use static linkagg / dynamic ? dynamic and static linkagg are in us...
by ydeschoe
01 Sep 2014, 11:15
Forum: OmniSwitch 10k
Topic: Linkagg LCAP size
Replies: 1
Views: 747

Linkagg LCAP size

All, Today we successfully migrated towards the VC setup on one part of our 10K switches, this without any major outage (small config error) Now I have a question, this is following me nothing to do with the VC setup. We have linkagg lacp channels with a size of 2 or 4 and we would like to increase ...
by ydeschoe
29 Apr 2014, 05:14
Forum: OmniSwitch 10k
Topic: Longest Uptimes running VC on your 10K?
Replies: 3
Views: 603

Re: Longest Uptimes running VC on your 10K?

All,

our plan is to do the upgrade to VC of the 1st pair at the end of this month and the 2nd pair 2 weeks later.

which version are you using, we will be using the 7.3.2.439.R01 and hope that this will be stable as this is our DC which can't effort any downtime's as this is a global site.
by ydeschoe
20 Dec 2013, 08:47
Forum: OmniSwitch 10k
Topic: Virtual Switch on 10K switches
Replies: 13
Views: 3086

Re: Virtual Switch on 10K switches

The upgrade was postponed till early 2014 and this is coming closer so I would like to have some more user experience on the VC. By end of April we would like to have this implemented, lab tests will start early Feb so we have enough time to setup the full layout and test fully. Is the setup current...
by ydeschoe
06 Aug 2013, 10:27
Forum: OmniSwitch 10k
Topic: Virtual Switch on 10K switches
Replies: 13
Views: 3086

Re: Virtual Switch on 10K switches

devnull, did you had more time to test the VC setup on the 10K switches as we are near to plan the upgrade in sept/oct to remove MultiChassis setup and move our VRRP setup we have from the TopOfRack switches to the more performance 10K switches and to simplify our setup of our network topology Our p...
by ydeschoe
21 May 2013, 07:07
Forum: OmniSwitch 6850 / 6850E
Topic: trunking
Replies: 7
Views: 1279

Re: trunking

Please try following Vlan 3 enable name “vlan-3” Vlan 3 port default 1/2 Vlan 3 port default 1/3 Vlan 4 enable name “vlan-4” vlan 3 802.1q 1/1 vlan 4 802.1q 1/1 now on port 1/1 you have both vlan's available to connect towards a different switch/router which has the same vlan's configured and also a...

Go to advanced search