Search found 246 matches
- 05 Nov 2019 23:36
- Forum: System
- Topic: DUAL CPU8 not show Local Main name in Main active CPU !
- Replies: 7
- Views: 6381
Re: DUAL CPU8 not show Local Main name in Main active CPU !
yep it shows Always the local name (1)pst_cpu20> Ethernet interface setup ======================== Netmask : 255.255.255.192 ============================================================================== | Machine type | Local interface | Name | Address | ===========================================...
- 04 Nov 2019 01:57
- Forum: System
- Topic: DUAL CPU8 not show Local Main name in Main active CPU !
- Replies: 7
- Views: 6381
Re: DUAL CPU8 not show Local Main name in Main active CPU !
doublevand981 wrote: ↑04 Nov 2019 01:46i connect to main role ip address (192.168.1.4). the CPU name show here should be cpu_m
- 04 Nov 2019 01:46
- Forum: System
- Topic: DUAL CPU8 not show Local Main name in Main active CPU !
- Replies: 7
- Views: 6381
- 03 Nov 2019 22:12
- Forum: System
- Topic: DUAL CPU8 not show Local Main name in Main active CPU !
- Replies: 7
- Views: 6381
DUAL CPU8 not show Local Main name in Main active CPU !
Hi all, i having OXE system R12.3 running with Dual CPU-8. i configured for system working with Dual CPU active and test bascul command OK . But whenever i accessed the MAIN CPU, the command promt ONLY show the local name ( it not show Local MAIN name). and tried to test both CPUs as main role still...
- 24 Oct 2019 21:39
- Forum: MAIN
- Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
- Replies: 16
- Views: 9535
Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
Here it is. https://1drv.ms/b/s!AsNSTc6gtb8HgdR69utlcXCEpODbZw?e=jsSuOh Hi Alex, i facing problem related to IO2N card, It's may be failed and don't have replaced card. our system using just 200 extension now (ip phone, dect sets, analog, 40 ibs). Could i delete IO2N board in mgr and let Dual CPU r...
- 13 Oct 2019 22:52
- Forum: MAIN
- Topic: CPU8 Blank after BIOS Setup
- Replies: 9
- Views: 5935
Re: CPU8 Blank after BIOS Setup
Hi all i want to share my story for you: I upgraded the CPU7 to CPU8 ----WITH OUT any additional cable. 1. i plugged CPU8 to slot 6 and 20 and Did NOT change any cables in backplane. Then just JUST got serial connection for CPU8 on slot 6 ONLY, and CPU8 on slot 20 could not get serial connetions 2. ...
- 13 Oct 2019 22:34
- Forum: MAIN
- Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
- Replies: 16
- Views: 9535
Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
- 13 Oct 2019 22:28
- Forum: MAIN
- Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
- Replies: 16
- Views: 9535
Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
Hi all I had changed the signaling as Alex guide then restart system . the Shelfs still could not up. After that i swap the cards from main shelf and remote shelf then it worked. But for some other remote shelfs i did the same procedure but it still down, even that i saw two INTOF2 cards can see eac...
- 12 Oct 2019 19:50
- Forum: MAIN
- Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
- Replies: 16
- Views: 9535
Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
Just unplug all INTOFs. you can also unplug all boards in peripheral ACTs. Wait till all boards in the main ACT came into service. Then plug one INTOF and wait for one peripheral ACT to start, let them load in one-by-one. It could happen due to heavy load, Did you set your ACT 0 Shelf Address : 0 S...
- 12 Oct 2019 11:13
- Forum: Boards
- Topic: New CPU8 - LAN / Serial Connection
- Replies: 20
- Views: 15170
Re: New CPU8 - LAN / Serial Connection
Hi all i want to share my story for you: I upgraded the CPU7 to CPU8 ----WITH OUT any additional cable. 1. i plugged CPU8 to slot 6 and 20 and Did NOT change any cables in backplane. Then just JUST got serial connection for CPU8 on slot 6 ONLY, and CPU8 on slot 20 could not get serial connetions. Be...