Alcatel Unleashed

Hello There, I have a problem in two of my Internode links, which are connected through 2MB links ( NPRAE Board). Attached jpg file describes the important programming. This link is continously fluctuating ( within seconds). In OXE and even in 4760, there are continous alarms related to this link. I...

incinfo is your friend. imvho - one is free space, the other one are inodes (the index place for files - in the 99.999% one file is one inode). download the latest patch for your release - it's quite old bug. Hi KrzsioD, Mine is a R9.0 -Patch-12. I found one post about the same incident, which advi...

Hello, I have this incident " Incident 1542 - Partition 6 is 80 % full ( Resource 1) and on some PABX, it is Resource-2. Though I got the solutions in the post here, which i would try, just wanted to know what does these Resource-1 or Resource-2 means. Are they related to Main & Standby CPU...

Dear Frineds, I have an special arrangement, where My OXE ( R9.0) is connected to a PDH through PCM2 Board.This PDH splits the time slots in PCM link into individual timeslots and reoute them on one Analog Boards within itself. so I have created one Trunk group As LIA + signaling type as NDDI with T...

Hello,

I have the same issue (R5.0). I tried with DirManag.exe and used cn=directory manager and password as AdminNmc and also the one, which was used at the time of installation, but every time it gives the error " Invalid credentials".

Hello, My 4760 Release is 3.2 and I have a mixed network of different OXE release ( R5.2 / 6.1 & 9.0). I configured OXE R6.1 & R9.0 in 4760 R3.2 without any problem. Node synchronization is also executed without any errors. Management ( telnet & configuration) is also working fine. But a...

Thanks Alex.

Rgds

Hello All,

Is it possible to know the compaitable 4760 release with mere .sw4760 file. I opened the file in notepad, but could not find the compaitable release except file version-12

Thanks for replies.

Regards

Dear Yong_zhao,

There is very little traffic ( negligible) and there is no application. It happened after release upgrade from R7.1 to R9.0.
I would put an update, once I login to the system. I am not on site and the only way is to have remote login.

Anyway, thanks for the suggessions.

Hello all,

It is related to one of my site on Release 9.0

I am getting a major incident-2071 " swap partition 31% full". I am unable to under the message clearly. Also tried to understand the same through incinfo command, but failed to understand.

Assistance is solicited.

Regards.