Alcatel Unleashed

Dear Alex , you have right . But on analog sets we have a particular modem ADEMCO 685 for receive alarm busrt 16 DTMF 50ms/50ms . Provider in Italy has switch backbone on VOIP and it send abnormal DTMF ( issue on dtmf detect ) on my PRI , lost half dtmf sending Than we have try that if Provider mana...

Dear Alex , yes it will not work Fax Group 4 Compatibility x x x x Phone : 1 x x Fax Group 3 : 1 x x Mixed Teletex : 0 x x Fax Group 4 : 1 x x Teletex character : 0 x x Videotex Mosaic : 0 x x Videotex Inter : 1 x x NPI/TON: Telex : 0 x x Msg.Handler Syst.(X400) : 0 x x ISO Application : 0 x x Audio...

No answer ???

Dear guys , On ISDN PRI provider, send me BC unresctricted for each call ( also for speech call ) , but i must via DDI redirect this to analog device . Actually PBX answer to provider destination incompatible There are a chance to manage PBX that accept call BC unresctriced towards device analog Tha...

Hi guys , i need to trace each dtmf sended via PRI from Provider . I have OXE that work fine from 5 year , it manage 2 PRI and 300 analog device connected to contact-id alarm receiver ( train 16 DTMF 50ms/50ms ) . Now i have 50% error some DTMF Digit are dropped , i receive 14-15 DTMF and not all . ...

no isn't bad line , device old old very old hangup quickly line .
SLI receive hookflash than line go on hold
I have make more change

- min max loop breack hookflash no solved

actually i have modify max/min Active /inactive phase i haven't issue but i want know what is this parameter

Hi at all , I have a strange problem , call across ISDN PRI go to Analog extension connect to a modem-machine ( not standard device ) . After ring and answer from device , call go automatically on hold ( caller hear 2 second Modem Tone , after hear Hold-Tone ) after few second hear modem tone , afte...

Sorry for my bad english ... I use SO-TA-Adapter connected to UA Board . Than i have configure Tel Feature Category = Routing Mode = Direct Routing I have configure Routing Table = 0 prefix for trunk group With this configuration , analog set or ua set work fine , when pickup phone it take immediatl...

Hi at all , two question

- i can set SO-SET for automatic off-hook dialing ? i have try same configuration for other phone but not work
- I have OXE MG 10.1 what ISDN-TA ADAPTOR i can install on UA board ... actually i have 3 TA ADAPTOR i must go to 16 TA-ADAPTOR on same board

Thanx
Bruno

Thanx soo much , i have also try Use Personal Calling Number attribute with set and work fine
Thanx
Bruno