Alcatel Unleashed

Thanks oldboy, in that case I will keep the default FQDN on both cpu

Hi

An upgrade is to be done in an OXE system with twin CPU (local redundancy)
An I read in the documentation, it is necessary to define the FQDN on both CPU. Since FQDN is composed by the "Node name" and the "Domain name", should I use exactly the same FQDN on both CPU ?

Thanks

Is it possible to upgrade a switch from R1 to R2 or R3 or I have to stick with the same revision ?

Could you please someone explain what is the difference in the release edition R2 and R1 ?
Thank you

I try with a few ports and different SFPs in order to avoid hardware failure.
I use 192.168.5.205/24 address and my PC is also in the same network. It seems that the ports of the switch are down

Thank you

This is the initial configuration, before we send the product to the customer.
This switch will act as core switch where a few OS6360 will be connected

In this OS6560 switch we use SFP-GIG-T in order to connect copper patch cords. We have activated web management, but the application is not working. Ping from the PC doesn't work either.

Please advise

Since it is not possible to configure static route on INT-IP3, I think that SBC is the only answer

Hi guys I need a guide to solve this problem on OXE R11 There is a need to connect 2 external SIP servers on the system, each one located on different network I configure two static routes in netadmin, so CPU7 has signaling with both of them When it comes to INT-IP3, I have only one option for Route...

The version is 4.1 and there is no other adapter on PC. This is PC, used only for Alcatel software downloading. I tested on another card and it works fine