found the solution.
Carrier doesnt sent sending complete EI .
Search found 603 matches
- 27 Jun 2023 11:24
- Forum: Trunk Groups
- Topic: Ring delay on set on Isdn T2 trunk group
- Replies: 1
- Views: 854
- 27 Jun 2023 04:17
- Forum: Trunk Groups
- Topic: Ring delay on set on Isdn T2 trunk group
- Replies: 1
- Views: 854
Ring delay on set on Isdn T2 trunk group
Hello Guys , I having a strange issue . OXE r10.0 latest release The symptom is when an incoming call arrives to isdn t2 trunk group the call rings to the set after a delay . The caller hears ringing tone (4 rings around 12-15 sec) and then call starts to ring on the set . On the t3 trace oxe sent A...
- 09 Mar 2023 06:20
- Forum: OmniSwitch 6350
- Topic: No login prompt via serial console
- Replies: 9
- Views: 11365
Re: No login prompt via serial console
try 115200
- 02 Aug 2022 10:01
- Forum: Beginner's questions about the OmniPCX OFFICE
- Topic: OmniPCX Large problems
- Replies: 4
- Views: 1948
Re: OmniPCX Large problems
Hello , This looks like you have power supply problem .Also if it is old cabinet you need to replace internal battery. This can be a problem when the battery is dead/damaged causes the power supply more resistance.sort cirquits. You need to test with an other cabinet if this dont work maybe you have...
- 01 Aug 2022 16:40
- Forum: Beginner's questions about the OmniPCX OFFICE
- Topic: SWL Limit error ?
- Replies: 4
- Views: 1588
Re: SWL Limit error ?
propably you have enabled all your physical ports and your licences are less?you need to put out of service logicaly the unwanted physhical accesses to make your 4039 to work . also an other thing... if is a new system you cant use older sets . Compatibilty level must be L101 Universal license are t...
- 27 Jul 2022 01:37
- Forum: VMWARE
- Topic: OXE OMS on vmware
- Replies: 6
- Views: 2748
Re: OXE OMS on vmware
srange... is your network interface up?
- 25 Jul 2022 13:08
- Forum: Beginner's questions about the OmniPCX OFFICE
- Topic: SWL Limit error ?
- Replies: 4
- Views: 1588
Re: SWL Limit error ?
Hello,
You should downgrade to the correct release as your purchaced software key.
You will have always this problem if your key is wrong.
Check your latest working backup to find out the correct release. after make LOLA and make a restore.
You should downgrade to the correct release as your purchaced software key.
You will have always this problem if your key is wrong.
Check your latest working backup to find out the correct release. after make LOLA and make a restore.
- 25 Jul 2022 13:00
- Forum: ON SITE TROUBLES
- Topic: CS-3 not booting
- Replies: 2
- Views: 2189
Re: CS-3 not booting
I had same issue some time ago with new CS3.
Faulty from factory . try to find similar ram and change it maybe you are lucky .
If still not booting sent it to alcatel
yours is new or it was working before?
Faulty from factory . try to find similar ram and change it maybe you are lucky .
If still not booting sent it to alcatel
yours is new or it was working before?
- 25 Jul 2022 12:51
- Forum: VMWARE
- Topic: OXE OMS on vmware
- Replies: 6
- Views: 2748
Re: OXE OMS on vmware
did you installed the oms with SOT ?
- 18 Jul 2022 12:07
- Forum: Phones
- Topic: IP PHONE 8088 NOE UPGRADE NOT FOUND
- Replies: 1
- Views: 887
Re: IP PHONE 8088 NOE UPGRADE NOT FOUND
your oxe has the latest firmware?