Alcatel Unleashed

found the solution.

Carrier doesnt sent sending complete EI .

Hello Guys , I having a strange issue . OXE r10.0 latest release The symptom is when an incoming call arrives to isdn t2 trunk group the call rings to the set after a delay . The caller hears ringing tone (4 rings around 12-15 sec) and then call starts to ring on the set . On the t3 trace oxe sent A...

try 115200

Hello , This looks like you have power supply problem .Also if it is old cabinet you need to replace internal battery. This can be a problem when the battery is dead/damaged causes the power supply more resistance.sort cirquits. You need to test with an other cabinet if this dont work maybe you have...

propably you have enabled all your physical ports and your licences are less?you need to put out of service logicaly the unwanted physhical accesses to make your 4039 to work . also an other thing... if is a new system you cant use older sets . Compatibilty level must be L101 Universal license are t...

srange... is your network interface up?

Hello,

You should downgrade to the correct release as your purchaced software key.
You will have always this problem if your key is wrong.
Check your latest working backup to find out the correct release. after make LOLA and make a restore.

I had same issue some time ago with new CS3.

Faulty from factory . try to find similar ram and change it maybe you are lucky .
If still not booting sent it to alcatel

yours is new or it was working before?

did you installed the oms with SOT ?

your oxe has the latest firmware?