desactive tone on seize and see if u're realy getting the pstn dial tone when u use prefix , or plug in an analog set to see if dial tone is present!
need also trunk cos
prefix meaning (bloc or overllaping mode)
Search found 869 matches
haven't seen that it was sip Overlapping dialing mode is it allowed by mittel ?! number compatible with -1 , number of digit to sent 0 ----nothing will be sent in this case , it will work what's the correspondence between logical and real discriminator of that ars prefix , ars routing table are them...
and what's 08000 definition at alcatel side Abrv number?! a t3 trace call could help should be simple transit call no need for ddi translation of that range , you need only to ddi translate the sw2 numbers if it's necessary . i ur case i'wll not use ddi translation it's not necessary alcatel side 80...
trkg between alcatel and mittel should be private 0 in alcatel should trkgp seize prefix for that trunkgp. number of digit to send 4 or manage dialing compatibility sw1 08000-----> alcatel traduces 0 as trkgp seizure for mittel if all evrything is allowed he will set 8000 to mittel "the problem is t...
- 05 Apr 2018 09:36
- Forum: SIP
- Topic: CISCO to OXE Outgoing Calls Issue - SIP/PCM Trunks
- Replies: 5
- Views: 392
what about the displayed Number "2) In ALL calls connected scenarios, the CUCM DID Numbers are NOT displayed properly ( ex. mobile calls ) as it shows the PCM Pilot Number only." ? is this also resolved?!