Alcatel Unleashed

It is use QSIG.
Interworking reports: it just have SIP and E1 in AudioCodes reference.
So, i want to know that MWI is work on T1 Trunk or not

Thanks

Hi All, I have common hardware R9.0, PRI-T1 <----Q-SIG---->AudioCodes <-----SIP------> Exchange UM 2013. Alcatel Extension can forward the call and leave message at Exchange UM. However, Alcatel Extension have not switch ON MWI (Message Light). AudioCodes Engineer and Exchange UM Engineer were enabl...

Hi All, I have TWIN CPU Release 9.1 and 4760 Release R5.2. It is work fine before 2 years. At Nov, we changed OXE Security = Isloate Ethernet interface and TCP access = ACTIVE. OXE will become to use SSH and SFTP. After changed, 4760 cannot synchronizate with OXE by Scheduler-Daily Job. It is becaus...

Hi all,

my customer Z32 board is break down and need to replace it. it is difficult to find a board in the market. I only find eZ32 board.
Is it possible to use EZ32 and user license to replace Z32?

Thanks

Eric

Hi Al,

I have OXE x 2 (R9.0) . It is established and work via SIP Trunk. May i know how to get PRA-T1 Trunk from OXE-2 (IP-Phone = 201)? Please advise which parameters need to modify?
OXE-1
PRA-T1 x 1
IP-Phone = 101
SIP Trunk x 8

OXE-2
IP-Phone = 201
SIP Trunk x 8

Thanks All

Hi buddies Thank you for your help. In my case, customer want to add T1-Trunk (Q-SiG) to Tie T1 Gateway such as AudioCodes. But Actis requires to upgrade a system to latest release. we know that trunk is not requires a license. So, i suggest to add T1 trunk in Shelf-2, board-5. Is it possible? or an...

Hi Support,

Would you know that maximum of PRA-T1 support in Large Rack? And would you share a "cabinet limits" documemt to me

Thanks

Thank you for all buddies Real Case is requires to connect AudioCodes T1 Gateway by Q-SIG protocol. It is work under GD Cabinet, but it was not test under MEX Cabinet and without synchronization priority. Anybody have reference case similar as this case? It is work synchronization = 255 to tie Audio...

HI ALL,

I have 2 Cabinet (Shelf 2-0 GD Card and Shelf 3-0 MEX Card)
Under Shelf-2, it have PRA-T1 x 2 (2-6, 2-7). Is it possible to add T1 Trunk under MEX/ PowerMEX Cabinet in 3-6 or 3-7?

Thanks

incvisu 13/05/15 09:34:45 13/05/15 09:35:04 000002I|---/--/-/---|=4:2199=A4400 Version : R10.1.1-j2.603-25-a-hk-c80s1 13/05/15 09:35:11 000002I|---/--/-/---|=2:1006=DPNSS Prefix Missing, No DPNSS prefix added. 13/05/15 09:36:16 000002I|---/--/-/---|=2:2176=A dynamic patch has been installed for TEL ...