Search found 671 matches

by benny
28 Jun 2018 05:15
Forum: OmniVista 2500 v4.x
Topic: How to disable Trap Notify
Replies: 2
Views: 434

Re: How to disable Trap Notify

I'd build a trap responder that auto-acknowledges the traps that you're not interested in.
by benny
20 Jun 2018 11:19
Forum: OmniVista 2500 v4.x
Topic: ovclient fails to start
Replies: 15
Views: 1569

Re: ovclient fails to start

You'll need Technical Support to connect to your system and help you. There is nothing I can do to help you - sorry.
by benny
14 Jun 2018 13:54
Forum: OmniVista 2500 v4.x
Topic: ovclient fails to start
Replies: 15
Views: 1569

Re: ovclient fails to start

This helped in every single ticket that I've seen. Did you also activate that repository? Did you use a new entry to set this repository or re-used a previous one?
by benny
14 Jun 2018 04:59
Forum: OmniVista 2500 v4.x
Topic: ovclient fails to start
Replies: 15
Views: 1569

Re: ovclient fails to start

To resolve the issue that you describe, set a new "Custom Repository" (an entry that you didn't use before) and apply the following values Repository Name: MyALECentralRepository Repository URL host: ovrepo.fluentnetworking.com Repository URL location: ov You should upgrade from Build 115 Patch 2 th...
by benny
13 Jun 2018 12:30
Forum: OmniVista 2500 v4.x
Topic: ovclient fails to start
Replies: 15
Views: 1569

Re: ovclient fails to start

I'd take a snapshot and try to upgrade to 4.3R1 .. If there are no error messages, it is hard to tell what is going wrong.
You should also consider to open a Technical Support Request with ALE, so that some engineer can attempt to fix the issue for you.
by benny
12 Jun 2018 07:30
Forum: OmniSwitch 9000 / 9000E
Topic: VRID Errors
Replies: 6
Views: 1080

Re: VRID Errors

The OmniSwitch will report other VRRP speakers in the same segment if they mismatch the local VRRP (VRID) configuration. In AOS Release 6 you may ignore VRIDs that don't belong to the local system via some debug commands. In your case you'll need to issue vrrpIgnoreVrid 51 in dshell, which will retu...
by benny
12 Jun 2018 06:59
Forum: OmniSwitch 6900
Topic: Disable inter vlan routing
Replies: 7
Views: 1160

Re: Disable inter vlan routing

If you set your ip interface to "no forward", it will not route/forward. This is part of the above mentioned documentation.
by benny
01 Jun 2018 03:36
Forum: OmniSwitch 6860 / 6860E
Topic: Static Route to Null
Replies: 3
Views: 564

Re: Static Route to Null

Starting AOS >= 7.3.4.236.R02 (and later) you should be able to use this command to create a black hole route:

-> ip static-route 2.2.2.2/32 interface Loopback metric 1
by benny
01 Jun 2018 02:46
Forum: OmniSwitch 2200
Topic: First steps on OmniSwitch 2220 (OS2220)
Replies: 1
Views: 644

First steps on OmniSwitch 2220 (OS2220)

After powering up, the OmniSwitch 2220 (OS2220) has the following default credentials / settings.
  • IP address: 192.168.1.3
  • Network mask: 255.255.255.0
  • Username: "admin"
  • Password: "" (empty)
by benny
31 May 2018 03:43
Forum: OmniSwitch 6400
Topic: ferst connection
Replies: 1
Views: 415

Re: ferst connection

Have a look at the documentation. The OS6400 is no longer available online, but the principle remains the same as OS6450. You find the documentation here: https://bit.ly/2LacqkY

Go to advanced search