Search found 68 matches

by strelok
07 Jun 2018 06:20
Forum: OmniSwitch 9000 / 9000E
Topic: VRID Errors
Replies: 6
Views: 1127

Re: VRID Errors

Ok, root cause of problem found. Out routers genereated such traps (about vrid error) because of server (cluster) that used vrrp protocol in the same network and sent announces to the same multicast group 224.0.0.18 Our routers also has VRRP gateway in that network but doesn't have this vrid. As res...
by strelok
07 Jun 2018 04:06
Forum: OmniSwitch 9000 / 9000E
Topic: VRID Errors
Replies: 6
Views: 1127

VRID Errors

OK, I found server (cluster) that send vrrp announces with vrid 51.

So, the main question: Is it normal behaviour when our router recieve announce with unknown vrid (that doesn't exist on router) and begin send traps about invalid vrid ?
by strelok
06 Jun 2018 15:41
Forum: OmniSwitch 9000 / 9000E
Topic: VRID Errors
Replies: 6
Views: 1127

Re: VRID Errors

Yeap, I tried today, but it's not simple because of a lot of 10GB interfaces. So, I will try anyway.
by strelok
06 Jun 2018 08:25
Forum: OmniSwitch 9000 / 9000E
Topic: VRID Errors
Replies: 6
Views: 1127

VRID Errors

Hi ! Yesterday we discovered that on out two routers 9702E which joined via VRRP sent traps alaVrrp3TrapProtoError permanently. command "show vrrp statistics" show that counter VRID Errors is increasing on both routers. I set swlog appid vrrp debug3 and see following messages: VRRP debug1 vrrpRcvPkt...
by strelok
06 Jun 2018 08:15
Forum: OmniSwitch 6850 / 6850E
Topic: Can't boot 6850
Replies: 2
Views: 738

Re: Can't boot 6850

Hi, Silvio ! I did not notice your answer. I know about 0x0 flag for coming back to ususal load. The main problem that we can't to get miniboot. When we try to get miniboot after changing flag to 0x1000 we get the same situation: loading stopped at message "/flash/ - Volume is OK". And can't use zmo...
by strelok
18 May 2018 04:17
Forum: OmniSwitch 6850 / 6850E
Topic: Can't boot 6850
Replies: 2
Views: 738

Can't boot 6850

Hi ! We have problem with booting switch 6850. Every time boot process stopped at message: /flash/ - Volume is OK And that's it. We tried to boot miniboot, but the same situation: booting process stopped at message "/flash/ - Volume is OK" No any erros in logs. I attached log from console. Any ideas...
by strelok
03 Oct 2017 06:54
Forum: OmniSwitch 6850 / 6850E
Topic: AOS 6.4.3 Problem with DHCP Server
Replies: 11
Views: 6605

Re:

silvio wrote:
21 Sep 2010 14:38
as attachment the file from Alcatel-BPW.
regards Silvio
Hello, silvio !

Unfortunately, link above doesn't work already.

Does this file (dhcp_6.4.3_GA.zip) still exists ? Could you re-download it ?
by strelok
29 Aug 2017 03:00
Forum: OmniSwitch 6850 / 6850E
Topic: DHCP server
Replies: 2
Views: 735

Re: DHCP server

Hello Silvio. Thank you for response. In documents I could find only vendor-specific field. In our case we need vendor-class parameter so that for example cisco phone could take ip address from certain for cisco pool of dhcp server. Example from Lunix below: class "cisco" { match if substring (optio...
by strelok
24 Aug 2017 14:46
Forum: OmniSwitch 6850 / 6850E
Topic: DHCP server
Replies: 2
Views: 735

DHCP server

Hello ! Is it possible to put in dhcpd.conf vendor-class (or vendor-specific parameter) ? Does such parameter exist ? And where I can find all list of parameters for dhcpd.conf file ? We have different ip phones and it send request to dhcp server with value vendor-class inside. So, we would like to ...
by strelok
21 Jul 2017 04:59
Forum: 7705 SAR
Topic: VRF on OmniSwitch 9000 and VPRN on 7705
Replies: 1
Views: 779

VRF on OmniSwitch 9000 and VPRN on 7705

Hello !

Can you hint me about compatibility VRF protocol with VPRN on 7705 ?
Or it's different protocols and can not work with each other ?

is there any analogue of VRF on 7705 that could be compatibile with VRF on OmniSwitch 9000 ?

Go to advanced search