Alcatel Unleashed

Its just the highest number you can assign a SDP.
Depending on sw/hw of your SAR-8, the number of actual configured SDP's will be quite a bit lower than 17407 SDPs.
You can get the actual number by contacting your Nokia support / sales manager to get the scaling numbers for your setup.

Hi. Since you want to upload it, I assume you want to enable FTP server or similar on the 7705. You can do something like this: /configure system security ftp-server user <username> access ftp (console snmp) * make sure you don't remove console if this is the ssh/telnet user user <username> home-dir...

Hi. Assuming the SAR-H behaves in the same manner as SAR-8 (and other SR/SAR), it should be something like this: Port 1/1/1 : Destination (wireshark perhaps) Port 1/1/2 : Source of the traffic you want to mirror /configure mirror mirror-dest 999 sap 1/1/1 create exit no shutdown exit all /debug mirr...

It should be compatible with all CPM using CF cards.
Not sure of the capacity of this CF card.
Just make sure that the capacity is sufficient for your usecase, eg. boot, logging, scripting etc..

@maximo170 did you ever get this working? I'm going through the same trials/tests right now and am not sure I'm having much luck. Based on the above example, the SDP is not in use. Its not bound to the VPRN, and the VPRN is auto-bind ldp, making LDP transport. Depending of the version, you can enab...

Hi.
If I'm remembering correct, the 12.0 was vRR only.
However, it seems that the one you have booted requires license to be able to do anything.
If you don't have a license, I would recommend using SROS 13.0.
13.0 is fully functional without license, but reboots every 60 minutes.

Hi. First of all, you should use router interface system on 7750 as you would use the loopback 0 on 7200. The interface system is used in a lot of usecases when it comes to how SROS is built. So, strong recommendation to delete the "lo0" on SROS and enable this address in if "system&q...

Hello professionals! Has anyone found a solution to the problem mentioned above? I am a technician of this team I found the reason for some but not all ... Seems to me that the memory have been impacted due to the electric shock. What does Nokia Support report when providing them with tech-sup file...

Haven't seen that error before, but it seems as if the MDA fails..
Does it work in a different slot in the SAR-8?
If not, I would mark that MDA as faulty..
Of course, you should provide Nokia with tech-sup files for proper investigation

Good luck

Never given EVE-NG any time, but it might be due to CPU..
Not sure what you are running on, but I've read somewhere that it only supports Intel CPU.