Alcatel Unleashed

your CPM may be too old for the version of TiMOS on that CompactFlash

Check your BOF configuration... it has an invalid FTP server configured.

Is the card in CF slot D3? Is boot ldr in the root directory? What's the version of the chassis? What's the version of TiMOS?

The flag above is: "TldpSessDown:

This indicates the Targeted LDP (T-LDP) session is down. Maybe an interface somewhere between R1 & R4 isn't running LDP?

You can try offloading BFD to the CPM if it's currently being processed by the IOM.

Is the Transport Tunnel (LSP) between routers oper-up? Is the Service Tunnel (T-LDP session) between routers oper-up?

Check out the following commands... assuming the physical port on the SR is 1/1/1. # Configure the port's speed to 10M,100M,1000M/1G. /configure port 1/1/1 ethernet speed {10|100|1000} # Configure the port's duplex for Full or Half. /configure port 1/1/1 ethernet duplex {full|half} # Disable auto-ne...

Good afternoon, 441. SR-OS is very OSI-oriented; so what we're used to calling "vlans," the RFCs refer to as "SAPs" (Service Access Points). On SR-OS, The service-delimiting vlan-tag is configured at the end of a physical port (separated by a colon), creating our SAP. Service Acc...

Hi, Shawn. If you've booted into SR-OS, then the CPM is compatible/supported. If you're getting messages related to support of the set-fabric-speed command, you'll likely have to upgrade your version of SR-OS.

Is there any more detailed information in the system logs?

monitor [ port | lag ] [ <port-id> | <lag-id> ] [ absolute | rate ] interval <seconds> repeat <repeat>