Alcatel Unleashed

Hi, After installation of OV8770 (R2.0.09.03) on Windows Server 2012 R2 Standard, it is observed that scheduler is not started up correctly and it opens with a blank status e.g. cannot see daily job, weekly job or RTU etc under scheduler.The OXE node is created correctly but not able to synchronize ...

Hi ,
I would like to know which Alcatel-Lucent SIP phone works with any other 3rd party SIP Server (e.g. Avaya, Asterisk etc.)
Have anybody tested it, if yes then which Alcatel-Lucent SIP phone (model number) and with which 3rd party server?

Please reply
Regards

Hi,
I have tested and verified console cable. It is working fine with other Alcatel-Lucent OmniStack LS6224P.
I have also tested with all speed and flow setting but no progress.
Could you please provide Break Key Sequence combination of OS6250-24? So that I may further test it

Can I have pin configuration of console cable (RJ-45 to DB-9 female end) to verify my cable, please?

Further to add that I have new OPS (R11.2) for the migration, as well

Well, I have downloaded OXE R11.2.2 from BPWS and I have experienced of OXE SW installation.
Please guide me about procedure for OXE SW Release migration, step by step.
Regards

Hi,
I need procedure for OXE software Release up-gradation from R6.2 to R11.2. The existing hardware is CPU6 and this CPU6 has to be replaced with CPU7-2 during the up-gradation. A new GPA2 board will also be added in OXE as per OPS file received to me.

Regards
Rizwan

Hi,

How to check and verify console port of OS6250-24
Please advise

Regards

Hi,
I have to interface OXE R11.0 with other PABX (DCX-600) through EMTL board (4W, MFC-R2).
I want to know which type of trunk group to be created for this and which trunk COS to be assigned to allocated trunk.
Please suggest
Regards

Hi
Is the issue resolved?