Alcatel Unleashed

Thank you… adding the mask to it did remove the rule.

Appreciate the help!

Thank you for the reply. You are correct, there is a VLAN rule.
Shows an ip-net rule. However, when I try and remove the IP network rule :
I get an error: ERROR:GROUP MOBILITY - RULE NOT PRESENT

Is there a different syntax to remove the rule?

Thanks.

Hello everyone, I have had to power on an old OS6850 for emergency use and I'm having an issue; this particular switch seems to have an IP assigned to VLAN 1 that I can't seem to remove. I apologize, I'm not fluent in Alcatel syntax so this may be a very easy solution. show configuration snapshot Re...

Hello, I have two 6850 switches acting as cores (they are not in a stack); Core1 is uplinked to a Cisco Edge switch. I would like to have a failover so that if Core1 is unavailable, that Core2 will send traffic to the Cisco Edge switch; as the core switches are not in a stack though, I'm not sure ho...

It does make sense that the /24 inside of the /20 wouldn't work now... sadly I had to sit down and draw it out to have it make sense to me. With that said, I'm temporarily keeping it on the 192.168.10.0/24 but I have another question... the only routing I have in place for that network is 192.168.10...

So... the issue seems to be that I'm creating a VLAN using an IP range within our network range. So we use 172.16.1.0/20 for our network. If I change VLAN 10 to 192.168.10.0/24, I have no issues with the VLAN communicating but if I use 172.16.10.0/24 (which is obviously within 172.16.1.0/20), it doe...

6850 has an IP of 172.16.1.250. I am pinging from the 6850. The only routes in the 6850 are 0.0.0.0 to the firewall as the gateway 172.16.1.254. The switch does not have an IP in either VLAN 10 or 50, only in VLAN 1 (which is the default VLAN). eth4 from firewall to port 20 on 6850 is tagged as VLAN...

Hello, I'm not well versed in AL OS... I'm trying to use a layer 2 VLAN in a 6850 but I must have missed something... I've created an interface on my firewall and assigned it to VLAN Tag 10, gave the interface address 172.16.10.254 on a /24 block. I went into the OS6850 and created VLAN 10, and then...

Hello, I have a stacked pair of O6850 switches that I need to update the IP address on... I've logged in, changed the IP and the static route 0.0.0.0 and I've done 'write memory' but when I power down the switches and reboot, everything is lost. Can someone walk me through the steps to actually save...

Good morning, I'm trying to configure one of these older switches to essentially be a 'dumb' switch. However, I can't find the command to set the interface to receive its IP via DHCP. It doesn't recognize ip interface dhcp-client like the 6850 does and I can't find mention of another way in the guid...