Search found 5 matches
- 20 Apr 2018 08:15
- Forum: OmniSwitch 6350
- Topic: LACP - linkagg Testing
- Replies: 3
- Views: 7689
Re: LACP - linkagg Testing
In the mean time have reconfigured the switch with dynamic LACP but it still takes time to failover to the other switch. See config below: ! Port Mapping : ! Link Aggregate : lacp linkagg 1 size 2 admin state enable lacp linkagg 1 actor admin key 1 lacp agg 1/2 actor admin key 1 lacp agg 2/2 actor a...
- 20 Apr 2018 02:25
- Forum: OmniSwitch 6350
- Topic: LACP - linkagg Testing
- Replies: 3
- Views: 7689
LACP - linkagg Testing
I configured LACP on a Stack of two OS 6350-24. If i disconnect 1 of the ports the link is still working, but if i remove both ports and put them back after a few seconds it does not get back up. Below is the config on these switches. -> show linkagg Number Aggregate SNMP Id Size Admin State Oper St...
- 20 Apr 2018 02:16
- Forum: OmniSwitch 6350
- Topic: Remove port from vlan
- Replies: 2
- Views: 1972
Re: Remove port from vlan
Thanks! it worked
- 18 Apr 2018 09:40
- Forum: OmniSwitch 6350
- Topic: Remove port from vlan
- Replies: 2
- Views: 1972
Remove port from vlan
I am trying to remove vlan 100 and vlan 2 from port 2/24 and i get the following message: -> vlan 100 no port 2/24 ERROR: Port is not mobile and must be for this command -> vlan 2 no port 2/24 ERROR: Port is not mobile and must be for this command how could i remove the vlan settings for this port? ...
- 18 Apr 2018 07:43
- Forum: OmniSwitch 6850 / 6850E
- Topic: Remove Vlan from port
- Replies: 1
- Views: 16699
Remove Vlan from port
I am trying to remove vlan 100 and vlan 2 from port 2/24 and i get the following message: -> vlan 100 no port 2/24 ERROR: Port is not mobile and must be for this command -> vlan 2 no port 2/24 ERROR: Port is not mobile and must be for this command how could i remove the vlan settings for this port? ...