Search found 1096 matches

by silvio
20 Apr 2018 06:57
Forum: OmniSwitch 6350
Topic: LACP - linkagg Testing
Replies: 2
Views: 29

Re: LACP - linkagg Testing

You haven't configured LACP. Your LAG is static. I recommend to reconfigure both switches with LACP and try again.
regards
Silvio
by silvio
20 Apr 2018 06:56
Forum: OmniAccess WLAN Switching Systems
Topic: OAW-4504 vlan
Replies: 1
Views: 36

Re: OAW-4504 vlan

Hi,
You need "trunk" native vlan is your untagged vlan 1. And allowed "all" or 1 and 10
Yes, you can create a lot of dhcp-ranges. the OAW needs than an own ip interface in vlan 10.
regards
Silvio
by silvio
20 Apr 2018 06:52
Forum: OmniSwitch 6450
Topic: OS6450 as DHCP server
Replies: 2
Views: 92

Re: OS6450 as DHCP server

Yes, this is possible
by silvio
19 Apr 2018 01:52
Forum: OmniSwitch 6350
Topic: Remove port from vlan
Replies: 2
Views: 30

Re: Remove port from vlan

vlan 2 no 802.1q 2/24
vlan 100 no 802.1q 2/24
by silvio
19 Apr 2018 01:51
Forum: OmniSwitch 6850 / 6850E
Topic: Remove Vlan from port
Replies: 1
Views: 33

Re: Remove Vlan from port

vlan 2 no 802.1q 2/24
vlan 100 no 802.1q 2/24
by silvio
18 Apr 2018 03:06
Forum: OmniSwitch 6450
Topic: adding a dhcp option
Replies: 2
Views: 78

Re: adding a dhcp option

here is a working dhcpd.conf. server-identifier dhcp.local; subnet 192.168.20.0 netmask 255.255.255.0 { dynamic-dhcp range 192.168.20.50 192.168.20.99 { option subnet-mask 255.255.255.0; option routers 192.168.20.1; option domain-name-servers 192.168.100.108; option dhcp-lease-time 30000; option 60 ...
by silvio
18 Apr 2018 03:02
Forum: OmniAccess WLAN Switching Systems
Topic: Disable Trap on a OAW-4704
Replies: 1
Views: 37

Re: Disable Trap on a OAW-4704

In WebUI you find the trap receiver here: Configuration > Management > SNMP
by silvio
17 Apr 2018 01:38
Forum: OmniSwitch 6900
Topic: OS6900 not able to login using admin user ( PAM error )
Replies: 1
Views: 91

Re: OS6900 not able to login using admin user ( PAM error )

Have you loaded the AOS image into the switch after rescue the flash?
by silvio
17 Apr 2018 01:36
Forum: OmniSwitch 6450
Topic: Stacking 2-6450/24s
Replies: 8
Views: 305

Re: Stacking 2-6450/24s

yes, you are correct.
regards
Silvio
by silvio
16 Apr 2018 14:06
Forum: OmniSwitch 6450
Topic: Stacking 2-6450/24s
Replies: 8
Views: 305

Re: Stacking 2-6450/24s

After both switches find together to one stack (this is a virtual switch) one of them will be choosen as primary. this will be the number 1. The other switch will change the stack number to 2. If both of them will have the #1 than you have at one switch the boot.slot.cfg and reload (without saving)....

Go to advanced search