Search found 1171 matches

by silvio
09 Oct 2018 12:56
Forum: OmniSwitch 6450
Topic: Filter Multicast
Replies: 6
Views: 176

Re: Filter Multicast

like written in some other posts:
you can enable both option without any problems. But normaly you need querying only at the switch with an ip interface in the vlans. And you need querier forwarding at switches with MC sources where the switch is not the queryier.
regards
Silvio
by silvio
09 Oct 2018 02:13
Forum: OmniSwitch 6850 / 6850E
Topic: Ominiswitch 6850 - Reset to factory defaults
Replies: 10
Views: 12333

Re: Ominiswitch 6850 - Reset to factory defaults

no 6900 is complete different to 6850 for this.
by silvio
09 Oct 2018 02:11
Forum: OmniSwitch 6450
Topic: Filter Multicast
Replies: 6
Views: 176

Re: Filter Multicast

normaly you don't need to reboot. And if your settings are correct than no forwarded stream should be visible without any receiver. with the following you can check the settings: show ip multicast status has to be enabled at all switches, Querying at the switch with the ip interfaces in the vlans. a...
by silvio
09 Oct 2018 01:53
Forum: OmniSwitch 6350
Topic: Making of switch port as routing port
Replies: 6
Views: 177

Re: Making of switch port as routing port

create vlan and put different ports to different vlan, f.e. untagged with: vlan 2 name xxx vlan 3 namce xxx vlan 1 port default 1/1-4 vlan 2 port default 1/5-7 vlan 3 port default 1/8 create ip interfaces for all the vlans ip interface VLAN-1 address 192.168.1.1/24 vlan 1 ip interface VLAN-2 address...
by silvio
08 Oct 2018 15:17
Forum: OmniSwitch 6900
Topic: LACP config secondary link not working
Replies: 12
Views: 384

Re: LACP config secondary link not working

You need the PERF lic for all switches within the chassis where you need the 10G-Speed (at the front SFP+). If you have the lic only in chassis 1 than only the last 2 ports of this chassis have the 10G (1/25 and 1/26 at 24-port switch, and 1/49 and 1/50 at 48port-switch). But if you need 10G-speed a...
by silvio
08 Oct 2018 15:11
Forum: OmniSwitch 6450
Topic: Filter Multicast
Replies: 6
Views: 176

Re: Filter Multicast

If you have multicast activated in all your switches (see a lot of other articles in the forum) than the multicast will forwarded only to devices that have joined to the multicast stream (via IGMP). So this is the best way. also you can activate multicast flood rate (at the uplinks at B from A) and ...
by silvio
08 Oct 2018 15:01
Forum: OmniSwitch 6900
Topic: LACP config secondary link not working
Replies: 12
Views: 384

Re: LACP config secondary link not working

This is possible. So show interface status has shown you the speed. Within a LAG all ports (in your case 1/25 and 2/25 need the same speed). but you can test with 1/25+26 (if they have the PERF Lic.)
regards
Silvio
by silvio
08 Oct 2018 02:03
Forum: OmniSwitch 6450
Topic: OS6450-P24 stopped tagging Voice VLAN
Replies: 3
Views: 114

Re: OS6450-P24 stopped tagging Voice VLAN

with your lldp-med config your phones learn about the vlan 6 tag. And all your ports are in vlan 6 staticly tagged (not my prefered config). So it seems to me that maybe some of your phones has the problem with lldp - that they don't learn the vlan id. So check direct at the phones about the vlan. T...
by silvio
08 Oct 2018 01:51
Forum: OmniSwitch 6350
Topic: Making of switch port as routing port
Replies: 6
Views: 177

Re: Making of switch port as routing port

if you have two or more ip interfaces than they will route between both the networks ....
by silvio
06 Oct 2018 12:16
Forum: OmniSwitch 6450
Topic: OS6450-P24 stopped tagging Voice VLAN
Replies: 3
Views: 114

Re: OS6450-P24 stopped tagging Voice VLAN

I haven't fully understand your problem. How learn the cisco phones to tag within vlan 6? Is this a static config direct at the phones or via LLDP-MED or via a dhcp-option? Option 150 is for connecting to the tftp (call manager?). If the phones are tagging with vlan 6 than your config should work: v...

Go to advanced search