You need routing and you need policies. The policies you should configure at your router=gateway (switch or firewall).
For you private-vlan is not a solution. You need ACL/policies.
BR Silvio
Search found 1888 matches
- 14 May 2024 13:37
- Forum: OmniSwitch 6900
- Topic: VLAN isolation
- Replies: 1
- Views: 36
- 03 May 2024 12:12
- Forum: OmniSwitch 6900
- Topic: CLI Message
- Replies: 2
- Views: 305
Re: CLI Message
difficult to understand this. For real clearance you need to open a ticket (maybe you find something in the knowledgebase in myportal). - svc means service (used for SPB or VxLAN). - 1010 means port 1/1/1 - accessport is an unp port type access - info -> this isn't a problem maybe a misconfiguration
- 28 Apr 2024 12:08
- Forum: OmniSwitch 2260 / 2360
- Topic: oversize frames on fiber port
- Replies: 2
- Views: 170
Re: oversize frames on fiber port
I am wondering about the same value for RX Oversize and CRC at all the ports. I assume the oversize is an display issue - you need to check with ALE support (but only with actal AOS release). CRC is mostly bad fibre connection (dirty connectors etc.). Use other connections/patchcables (if possible)....
- 28 Apr 2024 11:56
- Forum: OmniSwitch 9900
- Topic: Reload Working configuration without reboot
- Replies: 3
- Views: 162
Re: Reload Working configuration without reboot
maybe the syntax is not fully correct (not checked it). Use the tab-key to find out the correct syntax.
- 25 Apr 2024 14:47
- Forum: OmniSwitch 9000 / 9000E
- Topic: static route from source IP to destination
- Replies: 2
- Views: 180
Re: static route from source IP to destination
This is possible (named PBR - policy based routing). Search in the guides (or here in the forum) for "policy action permanent-gateway".
BR Silvio
BR Silvio
- 25 Apr 2024 14:45
- Forum: OmniSwitch 6860 / 6860E
- Topic: Disable TCP services on switch
- Replies: 3
- Views: 499
Re: Disable TCP services on switch
I know only the predifined services like telnet, ssh...
Search in cli-guide or open a ticket.
BR Silvio
Search in cli-guide or open a ticket.
BR Silvio
- 25 Apr 2024 14:43
- Forum: OmniSwitch 6850 / 6850E
- Topic: Can I use 510W power for a 6850E(non-poe switch)
- Replies: 1
- Views: 149
Re: Can I use 510W power for a 6850E(non-poe switch)
Try it. It should work
- 25 Apr 2024 14:42
- Forum: OmniSwitch 9900
- Topic: Reload Working configuration without reboot
- Replies: 3
- Views: 162
Re: Reload Working configuration without reboot
copy certified working make-running-directory
- 19 Apr 2024 08:44
- Forum: OmniAccess Stellar Express
- Topic: Is it possible to disable LLDP on the APs?
- Replies: 2
- Views: 427
Re: Is it possible to disable LLDP on the APs?
In my knowledge there is no official command to disable lldp at the AP. But maybe via a ticket you get a solution. But if I understand correctly the switch itself changes the untagged (management) vlan at the port to the AP. Correct? So this is a local problem at the switch. The AP tells the switch ...
- 19 Apr 2024 08:30
- Forum: OmniSwitch 6450
- Topic: Alcatel OS6360 & 6560 show anonymous UNP users
- Replies: 1
- Views: 187
Re: Alcatel OS6360 & 6560 show anonymous UNP users
Maybe the reason is TEAP. With PEAP or tls it shows the correct username. If you already use the actual firmware than you should open a ticket at ALE.
BR Silvio
BR Silvio