Yes, I had it on 6.7.2.122.R08. Might need to push it up to the Maintenance release 6.7.2.160.
Its all OK after a reboot, but goes back to that state after awhile.
Search found 112 matches
- 15 Jan 2023 23:34
- Forum: OmniSwitch 6450
- Topic: Why is Primary Chassis on OS6450 stack showing 0% memory utilization?
- Replies: 2
- Views: 995
- 12 Jan 2023 22:03
- Forum: OmniSwitch 6450
- Topic: Why is Primary Chassis on OS6450 stack showing 0% memory utilization?
- Replies: 2
- Views: 995
Why is Primary Chassis on OS6450 stack showing 0% memory utilization?
We do have an OS6450 stack on one of our Customer's site that's facing the mentioned problem. Everything is working as normal but the Primary chassis is showing 0% memory utilization. What can cause this?
- 06 Jun 2022 04:15
- Forum: OmniSwitch 6250
- Topic: "Write memory is not permitted when switch is running in certified mode"
- Replies: 9
- Views: 2105
Re: "Write memory is not permitted when switch is running in certified mode"
Yes Silvio, I failed to mention that. I overlooked the fact that he is dealing with OS6250s.
- 06 Jun 2022 04:04
- Forum: OmniSwitch 6560
- Topic: Macsec between OS6860 and OS6560
- Replies: 2
- Views: 422
Re: Macsec between OS6860 and OS6560
Hi Silvio
Thanks a lot for your response.
Everything checked out alright but the link is still down when macsec is enabled. I will try an issue proper licenses as I was using the training licenses, but I don't see any issue with it.
Cheers.
Thanks a lot for your response.
Everything checked out alright but the link is still down when macsec is enabled. I will try an issue proper licenses as I was using the training licenses, but I don't see any issue with it.
Cheers.
- 02 Jun 2022 17:50
- Forum: OmniSwitch 6450
- Topic: How to determine if a VLAN is still in use?
- Replies: 1
- Views: 543
Re: How to determine if a VLAN is still in use?
Check if they are assigned to any ports and those ports are active. It will be tricky if they are assigned to trunk ports and that port is active, then you will check the network device that is connected to that trunk port to see if that vlan is in use. If you have an NMS 2500, it will list the Vlan...
- 02 Jun 2022 16:47
- Forum: Configuration
- Topic: DDI setup to make calls
- Replies: 3
- Views: 1132
Re: DDI setup to make calls
Good question Vad.
Sergio, my reply above is for OXE.
Sergio, my reply above is for OXE.
- 02 Jun 2022 00:08
- Forum: Configuration
- Topic: DDI setup to make calls
- Replies: 3
- Views: 1132
Re: DDI setup to make calls
Try using Direct Trunk Seize. Set "Number Compatible With = -1" and configure the "No of Digits to send" in your Trunk Group settings. No of Digits should be the maximum number of digits of called numbers. Once you confirmed the trunk is working, then you can move to ARS and Disc...
- 02 Jun 2022 00:04
- Forum: OmniSwitch 6250
- Topic: "Write memory is not permitted when switch is running in certified mode"
- Replies: 9
- Views: 2105
Re: "Write memory is not permitted when switch is running in certified mode"
copy certified working
modify running-directory working
write memory flash-synchro
That works for me most of the time, worst case scenario, I reload the switches from working.
modify running-directory working
write memory flash-synchro
That works for me most of the time, worst case scenario, I reload the switches from working.
- 01 Jun 2022 23:56
- Forum: OmniSwitch 6560
- Topic: Macsec between OS6860 and OS6560
- Replies: 2
- Views: 422
Macsec between OS6860 and OS6560
We are trying to configure macsec between a 6860 and 6560 but the operation is still down. Below is the configuration on both switches: ! Security: security key 1 algorithm aes-cmac-128 encrypt-key 7a67552a3599018672f22d3d3db929d8 keyed-name 0x0000000000000000000000000000000038782f413f4428472b4b6250...
- 28 Jul 2021 20:34
- Forum: Application
- Topic: CCD reports calculation not equal
- Replies: 6
- Views: 4463
Re: CCD reports calculation not equal
A mystery, facing the same issue as well