Alcatel Unleashed

if you want a tool to calculate battery and rectifier but don't want to use the Alcatel ones provided in Actis then I suggest the best thing to do would be to go to the supplier you are going to use and provide them the power requirements as per actis output along with what your requirements are i.e...

try to search for "L3OPEN, I2 protocol init failed" there have been issues discussed before and it usually comes down to the PC having multiple NIC's

operators do not follow the standard forwarding applied to external callers or internal users. the operator shold have a dynamic key they press to go to voicemail.

hi just a note....
you say " i dial remote PABX extension no 7670"
trace says " IE:[70] CALLED_NUMBER (l=5) -> 80 Num : 7671"

is 7671 valid?

looks like hotel software PMS etc. http://www.ezeefrontdesk.com/index.php as per Cav no SDK just get EZEE to wirte the ip interface module as per the specs from Alcatel Application Partner Program (AAPP). basically they open comms on a port, use keep alives, and use the 2 way data comms as per the A...

hi, there are many of these type of DECT "cordless" solutions i normally use Simens Gigasets but don't confuse with a real DECT setup. in a DECT configuration you can have base stations with hand over etc. The type you are looking at is really just an expansion on a home cordless phone usi...

the quickest way may be to just have the bell in the group and supervise the bell on the multiline phone.

hi, on the new station you want to ring just go to the keys of that station and add a "set supervision" key of the virtual. set it to ring as you want i.e. long ring, short ring withor without over ring. note that first the new set must be multiline i.e. must have at least one multiline ke...

hi, I have seen this before. use the sipdump command to check icences. in some versions the licences are not released always and eventually calls cannot be made. quickest way to fix is to do a sipmotor restart (killall sipmotor) and in sipdump you will see liceneces free up. best also to put the lat...

pease try to edit your lic file as below
SERVER flexlic FLEXID=9-567D179F 27000
i.e. replace this_host with flexlic
then restart the flex and see if ok.