Alcatel Unleashed

i don't know a dshell command. have you checked the config? rebooted the switch? used latest firmware?

Have you had a look at the manual?
I states the download link for the needed USB driver for the virtual console on Micro USB
Alternativ RS45 to DB9 adabter + straight RJ45 cable 9600/8/N/1

Read the documentation!

VC is the way to roll now i have no 9700 active anymore

Never seen that. i would suggest to use the latest AOS and hope the bug was fixed somewhere in between.
otherwise open a SR, but they will request upgrade to latest/greatest as well

I don't think you can (and want to) use MC-Lag on the omniswitches, afaik that was a prcessor of virtual-chassis on the 6900 and has been retired now.
Use Virtual-Chassis and everything will be fine.

Frank was a spammer and is now banned.

Normally 9600 8N1 together with alcatel Adaptor and normal (straight) Rj45 should be fine. If you encounter this on different switches try another PC/console-cable/RS232-USB adapter (i had one lindy that seems to have developed similar feature, depending on "how the cable is bend" - anothe...

Yes with Spanning Tree you can do that out of the box.
ERP would be fast but not possible in 6350

This is not a static agg, it is a dynamic lacp that you have configured. so configure a lacp on Dell Switch as well configuration for a static agg is similar: -> static linkagg 2 size 2 admin state enable -> static linkagg 2 name "Link-inside" -> static agg 1/11 agg num 2 -> static agg 1/1...

I did encounter some issues in the past with Alcatel, but had the same experience with cisco.
Different Commands? Also with cisco IOS vs. NX-OS vs IOS-XR.

Alcatel does it's job and is normally less money-intense than a cisco solution.