Analog phone programmable key RBT delay

Post Reply
HUSSAINQCS
Member
Posts: 259
Joined: 21 Jan 2017 02:57

Analog phone programmable key RBT delay

Post by HUSSAINQCS » 30 Jul 2017 10:17

OXE release 11.1

I have configured the programmable key in the cetis analog phones

KEY no : 1 ------0 (which is working good)
KEY no : 2 ------2000(Which is taking time to reach the extension)
when you press the key after emitting all the digits only rbt to internal extension is going but this is not for "0"

Any suggestion

2000- Hunt group
0 --- network no

HUSSAINQCS
Member
Posts: 259
Joined: 21 Jan 2017 02:57

Re: Analog phone programmable key RBT delay

Post by HUSSAINQCS » 01 Aug 2017 15:28

Can anybody reply please

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3369
Joined: 23 Sep 2004 06:47
Location: Russia

Re: Analog phone programmable key RBT delay

Post by vad » 03 Aug 2017 09:10

KEY no : 2 ------2000(Which is taking time to reach the extension) - type of dialling pulse?
KEY no : 1 ------0 (which is working good) - no RBT?
But if you dial 0 (not from programmed key) - do you have RBT (as I understand you have problem with RBT?)?
if you dial 0 from digital set?

may be you have problem with 0 - make trace when dialled 0.

HUSSAINQCS
Member
Posts: 259
Joined: 21 Jan 2017 02:57

Re: Analog phone programmable key RBT delay

Post by HUSSAINQCS » 03 Aug 2017 09:18

Its good with one digit but as configured as 4 digit in speed dial key of analog phone after emitting all tones RBT was going

Post Reply

Return to “Beginner's questions about the Crystal Hardware”