Hi,
I need procedure for OXE software Release up-gradation from R6.2 to R11.2. The existing hardware is CPU6 and this CPU6 has to be replaced with CPU7-2 during the up-gradation. A new GPA2 board will also be added in OXE as per OPS file received to me.
Regards
Rizwan
How to upgrade OXE R6.2 (CPU6) to R11.2(CPU7-2)
-
- Member
- Posts: 13
- Joined: 28 Nov 2016 00:49
Re: How to upgrade OXE R6.2 (CPU6) to R11.2(CPU7-2)
Read TC (f.e. TC2122)
Do you have - system SW (R11.2), access to BPWS, some experience with OXE SW installation?
Do you have - system SW (R11.2), access to BPWS, some experience with OXE SW installation?
-
- Member
- Posts: 13
- Joined: 28 Nov 2016 00:49
Re: How to upgrade OXE R6.2 (CPU6) to R11.2(CPU7-2)
Well, I have downloaded OXE R11.2.2 from BPWS and I have experienced of OXE SW installation.
Please guide me about procedure for OXE SW Release migration, step by step.
Regards
Please guide me about procedure for OXE SW Release migration, step by step.
Regards
-
- Member
- Posts: 13
- Joined: 28 Nov 2016 00:49
Re: How to upgrade OXE R6.2 (CPU6) to R11.2(CPU7-2)
Further to add that I have new OPS (R11.2) for the migration, as well
Re: How to upgrade OXE R6.2 (CPU6) to R11.2(CPU7-2)
Read f.e. TC 2122 (or another TC about R11.2 installation).
But in any case main step:
1 - Rebuilding the database before saving - cdmao, fichges force_recover_dico (p. 9.4 from TC2122)
2 - Save database
3 - Install R11.2 to CPU7, manage IP addresses (netadmin)
4 - Restore database from R6.2
5 - Install new OPS (for R11.2).
6 - Check installation, make correction if needed (f.e. if VG was on CPU6 - manage VG on GPA2).
But in any case main step:
1 - Rebuilding the database before saving - cdmao, fichges force_recover_dico (p. 9.4 from TC2122)
2 - Save database
3 - Install R11.2 to CPU7, manage IP addresses (netadmin)
4 - Restore database from R6.2
5 - Install new OPS (for R11.2).
6 - Check installation, make correction if needed (f.e. if VG was on CPU6 - manage VG on GPA2).