Hi,
i starte a trace with T3 and everything is fine.. i stoped it with <crtl><z> ... and now i will it start again and it Show
--> Cleaning mtracer...
--> Positionning T3 Filter...
Ttracers Analyser activated
mtracer already in use ...
>>
an thats it
How can i stop it? or reactivat
tuner kmf and tuner km doesn't work..
Mtracer, trc show nthg
-
cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Mtracer, trc show nthg
Maybe you have another mtracer instance running.
Kill it as any other Linux program
Enviado de meu E6633 usando Tapatalk
Kill it as any other Linux program
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Mtracer, trc show nthg
kill or kill all mtracer doenst work...i try'd it..
-
HUSSAINQCS
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Re: Mtracer, trc show nthg
Have you found the solution as cavagnaro explained try to stop the mtracer which is already running
Re: Mtracer, trc show nthg
dhs3_init -R MTRACER
and when you run t3 - for exit - use Ctrl-C
and when you run t3 - for exit - use Ctrl-C
Re: Mtracer, trc show nthg
tuner km
regards...
--- back to basics... focus your eyes to the essential things... ---
regards...
--- back to basics... focus your eyes to the essential things... ---
--- back to basics... focus your eyes to the essential things... ---
Re: Mtracer, trc show nthg
thx all, but i get it:
kill -9 <procesID>
kill -9 <procesID>
Re: Mtracer, trc show nthg
pkill mtracer or killall mtracer is easier
