Disable password request

Post Reply
stoch
Member
Posts: 2
Joined: 21 Dec 2015 08:41

Disable password request

Post by stoch »

Hi all
I faced a problem with one of the DECT phone.
The customer uses the PBX System Alcatel OmniPCX Enterprise. Configuration is performed in the system OmniVista 4760.
One phone (DECT-400) requested a password when making outbound (Public) calls.
Example: Subscriber dials 9 -->> Next, system prompts (on phone screen) for a password "Enter Password".
If you enter "0000" then the call executes successfully.
If the call is local then the system does not request the password.
I tried to change "Public Network COS" but this has no effect.
Advise please, how you can disable the password request to public calls?
Thank you for attention.
User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4056
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: Disable password request

Post by tot3nkopf »

In dynamic state user (under user) disable Lock.
stoch
Member
Posts: 2
Joined: 21 Dec 2015 08:41

Re: Disable password request

Post by stoch »

Dear tot3nkopf, thank you so much for your help! I managed to disable to disable the password request.
To disable the password request has been executed, the following procedure.

Image
Image
Image
Image
Image
hitender9727
Member
Posts: 1
Joined: 15 Nov 2020 18:00

Re: Disable password request

Post by hitender9727 »

Thanks for the help tot3nkopf , very usefull
Post Reply

Return to “Beginner's questions about the Common Hardware”