Ring Tone did not heard when I call analog type

Post Reply
Waelkaamalzaki
Member
Posts: 33
Joined: 11 Apr 2017 03:45

Ring Tone did not heard when I call analog type

Post by Waelkaamalzaki »

Dear Support team ,
Thanks in advance , I have OXE common hard ware ,My problem when I tried to call analog extension type , The ring tone did not heard by analog phone set,
please advice
Top
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:
Contact cavagnaro

Re: Ring Tone did not heard when I call analog type

Post by cavagnaro »

Try another board.
All phones or a specific port?
If all, check board and voltage, if only one check port and if set works fine on another port

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Top
Waelkaamalzaki
Member
Posts: 33
Joined: 11 Apr 2017 03:45

Re: Ring Tone did not heard when I call analog type

Post by Waelkaamalzaki »

thank you for your help
I did what you advised and found that it was a problem from analog set
Top
Post Reply

Return to “Beginner's questions about the Common Hardware”