Omnipcx Office WBM

Post Reply
siptech
Member
Posts: 14
Joined: 10 Jul 2009 21:50

Omnipcx Office WBM

Post by siptech » 17 Jul 2009 11:46

Hello,

I have a new Compact edition with CPU-4 and (I think R7 software). I am unable to login via WBM as I keep getting a 503 error when trying to login to https://192.168.92.246/login/index.html.

I have also tried just 192.168.92.246 and 192.169.92.246:81 with no avail. I have tried both http and https. When using ping I can see that the lan light is flashing so I am sure this is the right IP.

I would prefer to use WBM as I have a mac. Can all admin be done via WBM or do I need OCM? Where can I get OCM r7? I am not a business partner and the dealer does not want to give it to me.

This is a new unused OMNIPCX.

Thanks!

siptech
Member
Posts: 14
Joined: 10 Jul 2009 21:50

Re: Omnipcx Office WBM

Post by siptech » 18 Jul 2009 18:45

I also tried https://192.168.92.246/admin

The 4028 phone gets to downloading config then hangs.

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4023
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: Omnipcx Office WBM

Post by tot3nkopf » 20 Jul 2009 09:42

siptech wrote:I also tried https://192.168.92.246/admin

The 4028 phone gets to downloading config then hangs.
This can have several causes. I would think that the 4028 is from the new 1000Mb range and your PBX firmware should be upgraded to the latest available on ABPS or simply your IP configuration is wrong (or you have some clocked TCP ports on local ethernet or VPN).

In all cases your provider should solve the problem. Ask for proffessional support.

Regards.

siptech
Member
Posts: 14
Joined: 10 Jul 2009 21:50

Re: Omnipcx Office WBM

Post by siptech » 20 Jul 2009 16:23

The problem is that I cannot login to the WBM and dont have access to OCM.

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4023
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: Omnipcx Office WBM

Post by tot3nkopf » 21 Jul 2009 09:36

siptech wrote:The problem is that I cannot login to the WBM and dont have access to OCM.
WBM won't help you. On OXO WBM is used only for maintenance and boot informations, or for internet services config --->not for voice service config. For that you need OMC.
It is clear from your posts that you don't have technical training or knowledge on OXO, that't why I told that you that you should ask for a certified engineer to solve your problems.

Regards.

siptech
Member
Posts: 14
Joined: 10 Jul 2009 21:50

Re: Omnipcx Office WBM

Post by siptech » 21 Jul 2009 10:45

I thought this form was for " IF YOU ARE NOT TECHNICALLY TRAINED ON THOSE PBX, PLEASE POST IN ONE OF THOSE FORUMS". Why not just close this entire form and tell everyone to seek a dealer. I am trained in Avaya and Siemens, I know PBX systems. Just not Alcatel.

ehia
Member
Posts: 56
Joined: 04 Mar 2009 19:52

Re: Omnipcx Office WBM

Post by ehia » 21 Jul 2009 20:58

siptech wrote:I thought this form was for " IF YOU ARE NOT TECHNICALLY TRAINED ON THOSE PBX, PLEASE POST IN ONE OF THOSE FORUMS". Why not just close this entire form and tell everyone to seek a dealer. I am trained in Avaya and Siemens, I know PBX systems. Just not Alcatel.
TOT3KOPF is right that's he's tellin you that "WBM won't help you. On OXO WBM is used only for maintenance and boot informations, or for internet services config --->not for voice service config. For that you need OMC." because as i read your reply you're insisting that The problem is that you cannot login to the WBM and dont have access to OCM and thats why he's tellin you that. He's more knowledgeable on Alcatel Lucent than you. Try to read your replies man!

siptech
Member
Posts: 14
Joined: 10 Jul 2009 21:50

Re: Omnipcx Office WBM

Post by siptech » 21 Jul 2009 23:30

Okay, I understand I need OCM. Where do I get this? There is no dealer in my area and I am not a business partner.

morio
Member
Posts: 104
Joined: 02 Nov 2011 08:38

Re: Omnipcx Office WBM

Post by morio » 08 Nov 2018 04:42


Post Reply

Return to “Beginner's questions about the OmniPCX OFFICE”