Cannot Access OmniPCX Office Management Console

Post Reply
trust02
Member
Posts: 2
Joined: 12 Dec 2018 03:59

Cannot Access OmniPCX Office Management Console

Post by trust02 »

i can access my Alacatel Lucent normally through OMC from one of my computers(Windows7), but when tried to access it from another one also using Widnows 7 i am getting an error saying HTTPS [login.4] - Soap login error - Error Code

Kindly assist to sort out this issue.

Regards,
MacotelIT
Member
Posts: 2
Joined: 29 Nov 2018 02:54

Re: Cannot Access OmniPCX Office Management Console

Post by MacotelIT »

Check the time, check IP of your pc to be in the same subnet with OXO, close any firewall that you might have and if nothing works do Windows 10 TCP/IP Reset.
trust02
Member
Posts: 2
Joined: 12 Dec 2018 03:59

Re: Cannot Access OmniPCX Office Management Console

Post by trust02 »

The time is correct and i can ping the PBX, i also disable the firewall and did reset of the network settings but unfortunately nothing worked as i am still getting the same error.

Any Other Ideas?
MacotelIT
Member
Posts: 2
Joined: 29 Nov 2018 02:54

Re: Cannot Access OmniPCX Office Management Console

Post by MacotelIT »

What TTL do you get 64 or something else?
Barrykeery
Member
Posts: 19
Joined: 26 Jun 2019 12:13
Location: United Kingdom
Contact:

Cannot Access OmniPCX Office Management Console

Post by Barrykeery »

well.. i am getting the UNMOUNTABLE_BOOT_VOLUME error and i was attempting to fix the boot sector using the recovery console... but i cant get to it.
https://www.nacdd1305.org/
Post Reply

Return to “Beginner's questions about the OmniPCX OFFICE”