ip 4028 no tftp response

officiel-salah: Member; Posts: 7; Joined: 16 Sep 2016 07:04

Quote

Post by officiel-salah » 16 Sep 2016 07:15

hello , I configured post 4028 with this configuration :
ip: 192.168.1.158
msk : 255.255.255.0
route 192.168.1.1
tftp : 192.168.1.101
but always show me the error : no response tftp
here is attached the pbx configuration picture

You do not have the required permissions to view the files attached to this post.

cavagnaro: Alcatel Unleashed Certified Guru; Posts: 7014; Joined: 14 Sep 2005 19:45; Location: Brasil, Porto Alegre; Contact:
Contact cavagnaro

Skype

Re: ip 4028 no tftp response

Quote

Post by cavagnaro » 16 Sep 2016 09:54

Does your PBX has at least 1 set created?
Can you ping the phone from the OXE?

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

officiel-salah: Member; Posts: 7; Joined: 16 Sep 2016 07:04

Re: ip 4028 no tftp response

Quote

Post by officiel-salah » 16 Sep 2016 10:03

i dont have a oxe ! i use a OXO can u see the picture in the post

officiel-salah: Member; Posts: 7; Joined: 16 Sep 2016 07:04

Re: ip 4028 no tftp response

Quote

Post by officiel-salah » 16 Sep 2016 11:50

i have CPU-2 , should i have to buy a module ip ????

cavagnaro: Alcatel Unleashed Certified Guru; Posts: 7014; Joined: 14 Sep 2005 19:45; Location: Brasil, Porto Alegre; Contact:
Contact cavagnaro

Skype

Re: ip 4028 no tftp response

Quote

Post by cavagnaro » 16 Sep 2016 17:06

Why then you post on OXE? Hummmm???
You need licenses and specific hardware

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer