subscribers / sip account

[bpcrew]

hello,

it is possible to config the oxo that subscriber 1 call over sip account 1 and subscriber 2 call over sipaccount 2

i have a few accounts not a trunk and will bind each account to different subscriber

all sip accounts are from same provider


thx

[giovanni.attolini]

No, is not possible have two SIP accounts registered in the same sip server in OXO.

[bpcrew]

No, is not possible have two SIP accounts registered in the same sip server in OXO.

thx 4 your answer,

maybe with asterisk between ???

[giovanni.attolini]

Yes, but to alternate the outgoing calls between sip accounts you will need verify the caller ID in the asterisk dial plan.

Notice that you can't create two sip trunks with the same ip destination in OXO.

[alex]

Notice that you can't create two sip trunks with the same ip destination in OXO.

From SW version 10.2 or 10.3 you can have several SIP-accounts with one SIP provider.

[giovanni.attolini]

From SW version 10.2 or 10.3 you can have several SIP-accounts with one SIP provider.

Is not what my OMC is telling me.

[alex]

In some TCs for SIP provider setup for OXO it is written how to have several accounts working with one SIP provider.
You have only one gateway defined and two SIP accounts assigned to that gateway.
Like that

[giovanni.attolini]

Very strange because here is not possible to create two accounts with the same gateway parameters.

Alex, do you know the TC number?

[alex]

E.g. this one:
TC2154 "SIP TRUNK SOLUTION SYNELYANS (FR): CONFIGURATION GUIDELINE RCE102"

2.4.2
...
In case of subscription of multiple SIP accounts with the Operator, it will be necessary to add more Public Numbering Plan lines and
accommodate the "SIP Acc Index" of each new line accordingly

[bpcrew]

E.g. this one:
TC2154 "SIP TRUNK SOLUTION SYNELYANS (FR): CONFIGURATION GUIDELINE RCE102"

2.4.2
...
In case of subscription of multiple SIP accounts with the Operator, it will be necessary to add more Public Numbering Plan lines and
accommodate the "SIP Acc Index" of each new line accordingly

thx alex,

any idea how the internal plan should look like? or a right config ???