OmniPck Office Mangement Console
OmniPck Office Mangement Console
Hi, how can I give more than 1 subnet to my IPBX?
Re: OmniPck Office Mangement Console
I'm not an expert in Alcatel, but I'm good in networking 
So if you have an another subnet, you need a router what can route into the first subnet.
For DHCP in Alcatel you need set a dhcp-helper / dhcp-relay feature in the router.
But if there are an alcatel networking expert, can told the best solution!
So if you have an another subnet, you need a router what can route into the first subnet.
For DHCP in Alcatel you need set a dhcp-helper / dhcp-relay feature in the router.
But if there are an alcatel networking expert, can told the best solution!
-
cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OmniPck Office Mangement Console
Subnet? Like another IP? Then no way. You router can route it but OXO can't have two ip addresses
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
