We have an analog phone with a number and we using normal analog phone. But now we want to change that phone 4019 modal. Since it was mapped on analog interface we are unable to attach that new phone. Now we want to move that number from analog to a digital interface. but all digital interface already have some numbers mapped on them. My question is how we can switch numbers between analog and digital interfaces without any problems.
Device:- Alcatel-lucent omnipcx 10.1.24.1
Please help.
Analog Interface to Digital Interface
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Analog Interface to Digital Interface
Just delete it and create a new digital device with same number. Or just try to change the model, remember to convert the shelf board slot to 255
Enviado de meu E6633 usando o Tapatalk
Enviado de meu E6633 usando o Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Analog Interface to Digital Interface
User/ Base station list:
- select user (digital, will use number from analogue phone)
- in fist row (upper) select "..." from right side of No. - you will have free and used numbers
- select number what you want (in your case from used number) - press Ok, press Modify (you will have notification about Inconcistancy), press Ok.
You will have digital interface with selected number and analogue interface without number.
- select user (digital, will use number from analogue phone)
- in fist row (upper) select "..." from right side of No. - you will have free and used numbers
- select number what you want (in your case from used number) - press Ok, press Modify (you will have notification about Inconcistancy), press Ok.
You will have digital interface with selected number and analogue interface without number.