Swap from PRI External Line to Analog External Line

Post Reply
deliad
Member
Posts: 3
Joined: 06 Aug 2017 13:37

Swap from PRI External Line to Analog External Line

Post by deliad » 06 Aug 2017 16:16

Hi,

I have alcatel 4400 pbx with PRI for external Lines configured on BPRA card

I want to Swap the PRI setup with an analog lines to make calls from analog lines thru the 4400 via NDDI Card that is installed

the 4400 will pickup the most first and free line available

i have access to the telnet with mtcl user and i know the mgr console,

this 4400 has been used with analog lines for specific prefix before and it was disabled when we switched to PRI

now i want use 6 analog lines instead of the PRI for external calls

can someone tell me what are the steps in detail that needs to be done?
Last edited by deliad on 08 Aug 2017 11:19, edited 1 time in total.

deliad
Member
Posts: 3
Joined: 06 Aug 2017 13:37

Re: Swap from PRI External Line to Analog External Line

Post by deliad » 08 Aug 2017 11:09

i have NDDI Board installed

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6775
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Swap from PRI External Line to Analog External Line

Post by cavagnaro » 11 Aug 2017 09:39

Add those trunks to the trunk group.
Download system documentation, you will find everything you need in the

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “Beginner's questions about the (4400 / Enterprise) PHONE APPLICATION or OPERATING SYSTEM”