Alcatel SoftPanel Wallboard
- knightr1der
- Alcatel Unleashed Certified Guru
- Posts: 1788
- Joined: 16 Feb 2007 19:07
- Location: Omnipresent
Alcatel SoftPanel Wallboard
I just installed this one.
It has a built in PC and comes with Ubuntu preloaded with firefox. It is configured to go straight into firefox once switched on. The URI obviously needs to be setup to point to the virtual wallboard you have set up in the WBM. Setting the IP address is the same as you do on traditional IP wallboards and when the Panel boots up, you will see the factory default IP @. Mine was 10.0.0.159
It has a built in PC and comes with Ubuntu preloaded with firefox. It is configured to go straight into firefox once switched on. The URI obviously needs to be setup to point to the virtual wallboard you have set up in the WBM. Setting the IP address is the same as you do on traditional IP wallboards and when the Panel boots up, you will see the factory default IP @. Mine was 10.0.0.159
You do not have the required permissions to view the files attached to this post.
History repeats itself - because no one listens the first time!
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Alcatel SoftPanel Wallboard
Nice! Is this for OTPE or only CCD?
Hehe, nice signature "list" however you missed the "Car washer ACSE Certified"
Hehe, nice signature "list" however you missed the "Car washer ACSE Certified"
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Alcatel SoftPanel Wallboard
May be we should create a new forum named "Hall of fame" and put there photos of our numerous certificates?cavagnaro wrote:
Hehe, nice signature "list"
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
- knightr1der
- Alcatel Unleashed Certified Guru
- Posts: 1788
- Joined: 16 Feb 2007 19:07
- Location: Omnipresent
Re: Alcatel SoftPanel Wallboard
The softpanel solution is for all 3 CC flavours;
- Standard
- Premium
- Genesys
My signature list should grow in december if I pass my University courses that I studied this year. Results due around 12th Dec But if Successful, I will become: BSc (hons) Information and Communication Technologies
- Standard
- Premium
- Genesys
My signature list should grow in december if I pass my University courses that I studied this year. Results due around 12th Dec But if Successful, I will become: BSc (hons) Information and Communication Technologies
History repeats itself - because no one listens the first time!
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Alcatel SoftPanel Wallboard
Genesys? Hum...any document for this WB?
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Alcatel SoftPanel Wallboard
nice solution with the built in PC !
I just installed a softpanel as well, it's very nice and easy to configure! I used the agent status, but it is shown in 1.0, 5.0 and not status in text like "logged in", will have to something about that later...
We use a ordinary PC with a big screen to display with firefox.
You can change the logo, background and everything But ProServ has made a nice layout so i will use it.
I just installed a softpanel as well, it's very nice and easy to configure! I used the agent status, but it is shown in 1.0, 5.0 and not status in text like "logged in", will have to something about that later...
We use a ordinary PC with a big screen to display with firefox.
You can change the logo, background and everything But ProServ has made a nice layout so i will use it.
You do not have the required permissions to view the files attached to this post.
J.Sundberg
Alcatel-Lucent CSE
CCO
CCIVR
ACR
Alcatel-Lucent CSE
CCO
CCIVR
ACR
Re: Alcatel SoftPanel Wallboard
forgot to add..
theese agents are a beta-test for REX (business set) in PE group, it works really good, we have the same statuscontrol/realtimeinfo over a cellphone, like if they had a 4068 or something.
A very much requested function from our customers!
theese agents are a beta-test for REX (business set) in PE group, it works really good, we have the same statuscontrol/realtimeinfo over a cellphone, like if they had a 4068 or something.
A very much requested function from our customers!
J.Sundberg
Alcatel-Lucent CSE
CCO
CCIVR
ACR
Alcatel-Lucent CSE
CCO
CCIVR
ACR
-
- Alcatel Unleashed Certified Guru
- Posts: 1165
- Joined: 30 Aug 2006 13:43
- Location: Europe, Poland
Re: Alcatel SoftPanel Wallboard
any documentation,
what license needed ?
how to order etc... ?
what license needed ?
how to order etc... ?
Please note that at no time I will provide you with OXE/4400 nor AOS releases.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: Alcatel SoftPanel Wallboard
KnightRider,
I have a couple of wall boards in my lab, but I don t know how to use them.
What do I need to work with them ? Install a regular CCD ?
I have a couple of wall boards in my lab, but I don t know how to use them.
What do I need to work with them ? Install a regular CCD ?
Code Free Or Die