T.38 OXE R9.1

IP and Voice over IP
Post Reply
link
Member
Posts: 36
Joined: 19 Aug 2015 14:06
Location: Ukraine

T.38 OXE R9.1

Post by link » 16 May 2017 13:09

Hello,
I have already configured OXE Release 9.1 (I1.605.41) with other IP PBX system via SIP trunk. Other IP PBX is configured as SIP Ext. Gateway.
Voice and outbound fax are worked properly. But I have issue with incoming fax.
I got dumps and saw their. Only one setting is different in our SIP/SDP package of RE_INVITE to T.38 session.
OXE re-invite package contains "t38FaxUdpEc" (error correction) but other IP PBX reply to us with 487 SIP error message because doesn't support it and incoming fax didn't receive.

Our SDP:

v=0
o=OXE 1492063321 1492063322 IN IP4 172.17.255.10
s=abs
c=IN IP4 172.17.255.14
t=0 0
m=image 32552 udptl t38
a=T38FaxVersion:0
a=T38MaxBitRate:14400
a=T38FaxRateManagement:transferredTCF
a=T38FaxMaxBuffer:256
a=T38FaxMaxDatagram:256
a=T38FaxUdpEC:t38UDPRedundancy

Remote SDP:

v=0
o=- 0 1 IN IP4 172.17.24.13
s=-
c=IN IP4 172.17.24.14
t=0 0
m=image 10022 udptl t38
a=T38FaxVersion:0
a=T38FaxRateManagement:transferredTCF
a=T38maxBitRate:14400
a=T38FaxMaxBuffer:1800
a=T38FaxMaxDatagram:82

Can I disable T38FaxUdpEC in OXE via Fax or System parametrs?
Thanks.

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4007
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: T.38 OXE R9.1

Post by tot3nkopf » 20 May 2017 08:35

Maybe IP-->Fax Parameters --> FAX ECM ?

link
Member
Posts: 36
Joined: 19 Aug 2015 14:06
Location: Ukraine

Re: T.38 OXE R9.1

Post by link » 21 May 2017 12:11

In OXE Release 9.1 FAX ECM option doesn't present as a setting.

Post Reply

Return to “IP / VoIP”