Shortcut Code for Copy an existing iphone to a new install

IP and Voice over IP
Post Reply
esotronic
Member
Posts: 10
Joined: 27 Nov 2014 08:34

Shortcut Code for Copy an existing iphone to a new install

Post by esotronic »

Hello,

I already did this one time and I can't find the code/shortcut to copy an existing phone (Number 15) and all settings to my new installed phone (number 51). I dont wanna have the new number 51... all settings including the Number 15 should be portet to it. This works on deskphones and ip touch phones.

I hope somebody can help me out here.

Greetings

Rolf
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Shortcut Code for Copy an existing iphone to a new install

Post by cavagnaro »

Please don't double post...just don't

Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
esotronic
Member
Posts: 10
Joined: 27 Nov 2014 08:34

Re: Shortcut Code for Copy an existing iphone to a new install

Post by esotronic »

Sorry for that, it was not intended. Just thought it was the wrong forum.
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Shortcut Code for Copy an existing iphone to a new install

Post by cavagnaro »

Well create a profiled user based on the complete one. There is no key combo to load parameters from one set to another. You are maybe confusing with set in/out of service prefix.


Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Post Reply

Return to “IP / VoIP”