OmniPCX-ISA-VPN Client-Forever4035

IP and Voice over IP
Post Reply
Bogdan
Member
Posts: 1
Joined: 24 Apr 2009 02:24

OmniPCX-ISA-VPN Client-Forever4035

Post by Bogdan » 09 Oct 2009 14:17

Hi,
I am trying to use forever4035 with an OmniPCX Enterprise via a vpn client conected to an ISA server.
I can ping from my computer to PCX and I can ping from PCX to my computer but I assume forever4035 can not boot.
If I am trying a manual tftp session to PCX I got the following error:

Error on server : Client request without requested ethernet address

Anybody has a solution ?

Thank you
Bogdan

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4007
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: OmniPCX-ISA-VPN Client-Forever4035

Post by tot3nkopf » 14 Oct 2009 07:26

Probably you need to configure in such way that the TFTP request issued by the phone to hit the PBX, or to configure a local TFTP server with the requested files. Are you sure that all needed ports are active in your config?

L_lefante
Member
Posts: 173
Joined: 07 Aug 2013 10:30

Re: OmniPCX-ISA-VPN Client-Forever4035

Post by L_lefante » 30 Sep 2015 09:59

Hi,

I am having a similar issue with SIP phones trying to get config files from OXE tftp server, at least tftp server shows same error. In capture I can see the phone is correctly trying to get the file from OXE, however the OXE response with:

Message: Client request without requested ethernet address

Any more ideas?

Post Reply

Return to “IP / VoIP”