IP Touch 4018 Firmware Update

rockie88
Member
Posts: 3
Joined: 10 Aug 2016 13:15

Re: IP Touch 4018 Firmware Update

Post by rockie88 » 04 Nov 2016 11:01

hi Ahmedfahmey'

can you share to us the files to copy to tftp root folder, can you also share to us the file for sip config.

thanks,
ahmedfahmey wrote:Dear All

sorry for beeing late

to update your iptouch 4018 follow the following steps

1- prepare a cross cable
2- install a tftp server ( i used solarwinds tftp server )
3- copy all files to the tftp root folder
4- edit the sipconfig file
5- configure your set ip parameters
6- change restrict vlan to "no"
7- change vlan to your vlan
8- change tftp server 1 & 2 to the pc ip ( tftp server ip )
9- restart your set ( you will see that it's updating )
10- after doing that turnoff the set then connect it to computer by cross cable
11- start the set in industrial mode by holding ( i + 1 + 2 + 3 ) while starting the set & release all buttons when leds lights
12- set your pc ip to 192.168.1.6
13- telnet 192.168.1.1
14- type "verswitch" then press "Enter"
15- restart the set
16- while restarting press ( i + # ) to enter configuration mode
17- go to software info
18- now you can change NOE to SIP
19- after changing to SIP restart the set after connecting normally to your network with the permanent network settengs
20- make sure that your tftp server is working & all files are in the tftp root folder

i think it's ok now set updated & you can connect iptouch to freepbx or any SIP pbx
[/quote]

RubenKremer
Member
Posts: 2
Joined: 18 Sep 2018 09:28

Re: IP Touch 4018 Firmware Update

Post by RubenKremer » 21 Sep 2018 04:05

ahmedfahmey wrote:
30 Aug 2016 05:43
Dear All

sorry for beeing late

to update your iptouch 4018 follow the following steps

1- prepare a cross cable
2- install a tftp server ( i used solarwinds tftp server )
(...)
19- after changing to SIP restart the set after connecting normally to your network with the permanent network settengs
20- make sure that your tftp server is working & all files are in the tftp root folder

i think it's ok now set updated & you can connect iptouch to freepbx or any SIP pbx
Hi Ahmed

Just something I'd like to check with you, even though we're two years later now: are the phones you're using 4018 or 4018EE variations. Since I've been working to get the non-EE to accept SIP (despite lack of official support). However what I'm finding is that the non-EE version has a 8MB DRAM chip, and the EE version is said to have a 16MB DRAM chip.

WarnerBek
Member
Posts: 12
Joined: 21 Dec 2018 09:01
Location: Panama
Contact:

IP Touch 4018 Firmware Update

Post by WarnerBek » 16 Jan 2019 12:02

Hi,

I was just wondering what firmware is needed in order to install ScummVM on the Ipod Touch? Is there anything else to consider? Please let me know what I would need to do this.

Thanks.

Post Reply

Return to “ipTouch (40x8) issues and tricks”