HI
I have OXE cloud based installation. from time to time IPphones froze and made a reset.
Attaching defence 99 from a set witch reset.
-033 05/01/2017-12:50:08 DoS____:bcast[n] 66(008-02:55:48.920 :100)
-032 05/01/2017-12:50:08 reset__: [13] uaudp_lost_connect (2002 ua_udp_protocol.c)
-031 000-00:00:09.170 code: 4.61.21 data: 4.61.21 sysdate:
-030 05/01/2017-12:51:03 code: 4.61.21 data: 4.61.21 sysdate: 05/01/2017-12:51:03
-029 05/01/2017-13:19:49 arp_resolve failed (192.168.115.11)
-028 09/01/2017-00:02:54 reset__: [13] uaudp_lost_connect (2002 ua_udp_protocol.c)
-027 000-00:00:09.140 code: 4.61.21 data: 4.61.21 sysdate:
-026 09/01/2017-00:03:59 code: 4.61.21 data: 4.61.21 sysdate: 09/01/2017-00:03:59
-025 10/01/2017-06:46:42 reset__: [13] uaudp_lost_connect (2002 ua_udp_protocol.c)
-024 000-00:00:09.150 code: 4.61.21 data: 4.61.21 sysdate:
-023 10/01/2017-06:47:47 code: 4.61.21 data: 4.61.21 sysdate: 10/01/2017-06:47:47
-022 10/01/2017-09:40:29 arp_resolve failed (192.168.115.12)
-021 10/01/2017-13:40:34 arp_resolve failed (192.168.111.5)
-020 11/01/2017-13:09:55 arp_resolve failed (192.168.115.12)
-019 11/01/2017-15:33:30 arp_resolve failed (192.168.115.12)
-018 12/01/2017-08:12:04 arp_resolve failed (192.168.117.69)
-017 12/01/2017-13:00:03 arp_resolve failed (192.168.115.12)
-016 12/01/2017-15:43:49 arp_resolve failed (192.168.115.11)
-015 15/01/2017-08:14:53 arp_resolve failed (192.168.115.12)
-014 15/01/2017-08:27:21 arp_resolve failed (192.168.115.12)
-013 15/01/2017-08:43:25 arp_resolve failed (192.168.115.12)
-012 16/01/2017-12:21:47 arp_resolve failed (192.168.115.11)
-011 17/01/2017-08:34:49 arp_resolve failed (192.168.115.11)
-010 19/01/2017-13:43:23 arp_resolve failed (192.168.117.11)
-009 22/01/2017-09:54:50 arp_resolve failed (192.168.115.12)
-008 22/01/2017-10:12:31 arp_resolve failed (192.168.115.11)
-007 24/01/2017-09:34:58 arp_resolve failed (192.168.111.111)
-006 24/01/2017-13:01:55 arp_resolve failed (192.168.111.111)
-005 24/01/2017-14:00:46 FATAL eptdevice.c (3292), task=ua_udp error=AUDIO (0xffffff6f)
-004 24/01/2017-14:00:46 reset__: [32] fatal_error [H]
-003 000-00:00:09.220 code: 4.61.21 data: 4.61.21 sysdate:
-002 24/01/2017-14:01:42 code: 4.61.21 data: 4.61.21 sysdate: 24/01/2017-14:01:42
-001 24/01/2017-15:19:25 telnet from 192.168.108.10 accepted
incvisu said :
24/01/17 14:00:39 000001S|---/--/-/---|=2:0275=ACCOUNTING: Appli PRINTING : feature incident 2 0
24/01/17 14:01:18 000001M|003/00/0/218|=3:0386=Sig. on IP set: No response from de set 00:80:9f:e9:89:12,8350
24/01/17 14:01:39 000001M|000/00/0/000|=4:0426=IPTOUCH terminal reset 32,00:80:9f:e9:89:12,8350
24/01/17 14:01:42 000001M|003/00/0/218|=5:2053=Terminal 218 in service
The oxe version is R11.1 l1.301.26.a
Please any advise will be welcomed.
Samuel
IPtouch reset randomely
Re: IPtouch reset randomely
check broadcast in network. the phone set has detected a DOS Attack because of too many broadcast traffic. this can be a reason that keepalive packets cannot received in a timely manner.
regards...
--- back to basics... focus your eyes to the essential things... ---
regards...
--- back to basics... focus your eyes to the essential things... ---
--- back to basics... focus your eyes to the essential things... ---
-
- Member
- Posts: 13
- Joined: 05 Aug 2008 14:08
Re: IPtouch reset randomely
Thank you
our network guy will check this issue.
samuel
our network guy will check this issue.
samuel
-
- Member
- Posts: 13
- Joined: 05 Aug 2008 14:08
Re: IPtouch reset randomely
Hi
is there any DOS defence mechanism that can be enabled in the OXE or IPphones . The switches are already DOS protected.
Samuel
is there any DOS defence mechanism that can be enabled in the OXE or IPphones . The switches are already DOS protected.
Samuel
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: IPtouch reset randomely
If the switches would be really DOS protected then you wouldn't have a DOS attack. Check broadcast, which happens to be detected by OXE as an attack due high traffic on its Ethernet port. Ip phones should be on a isolated VLAN with QoS over data packets.
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 13
- Joined: 05 Aug 2008 14:08
Re: IPtouch reset randomely
Thank you for the answer.
samuel
samuel
Re: IPtouch reset randomely
i agree to cav.
redesign of network is the only way to prevent too much broadcast to voip euqipment. also take a look in the alcatel-lucent network design guide.
regards...
--- back to basics... focus your eyes to the essential things... ---
redesign of network is the only way to prevent too much broadcast to voip euqipment. also take a look in the alcatel-lucent network design guide.
regards...
--- back to basics... focus your eyes to the essential things... ---
--- back to basics... focus your eyes to the essential things... ---
Re: IPtouch reset randomely
Hi all,
I have the same issue IPTOUCH terminal reset 13, any solution dor this?
Regards
I have the same issue IPTOUCH terminal reset 13, any solution dor this?
Regards