caller ID overdrive

[intheskin]

I am deploying phones for a fire department.
They need to receive the caller ID even if it is secret.
The operator say the configure the T2 to do this.

When I trace the primary, I always see the caller/called number but it did not show on the phone screen.

As far as I know their is field in the trace for the secret option, do you know wich it is?

Is their something I must program in the oxe (r8) to reveal the number?

PS: unmasked numbers are shown correctly.

[vad]

About field:
you have f.e. "Calling number 01 81: 1234567890"

If caller order "secret identity" feature you will have "Calling number 01 a1: 1234567890"

81 (or a1) - we have 8 bits,
bits 7 and 6
00 presentation allowed
01 presentation restricted
10 number not availiable due to internetworking
11 reserved

[intheskin]

Here what I found in my traces

a1 10100001
a3 10100011
80 10000000
81 10000001

If I take bit 7 and 6 (right to left, starting at 0), all have the value 10?

From the test I have made 8x is ID is clear, Ax is secret.

Could you explain me some more or maybe tell me if you have a "how to read traces for noobs"!

Anyway, thanks for the quick answer!

[OXE_4400]

Is their something I must program in the oxe (r8) to reveal the number?

You need to order specific license from ALU, this licence is not covered by ACTIS.

[root]

you need OPS lock 95, not visible in spadmin / Actis