Hello guys
I had a problem with 4400 R3.0 and i could not retrieve the ops from the system. The problem is the floppy did not work (I/O ERROR). I took the backup (mao) i extract it and i was able to take the software.mao file.
Is it possible to built somehow the ops file through the mao file? Or is an other way to retrieve it from the hard disk?
old releases does not have the directory of OPS under usr4..
OPS FROM MAO FILE
- Konstantinos.E
- Alcatel Unleashed Certified Guru
- Posts: 616
- Joined: 12 Jan 2010 04:15
- Location: Honolulu
OPS FROM MAO FILE
Alca_holic
Re: OPS FROM MAO FILE
Not cleare what is your problem:
save mao to cpu disk
download to PC
open mao with 7-Zip
extract from DHS3data/mao what you need (hardware.mao, *.zip, *.swk, *.*.hw, software.mao)
save mao to cpu disk
download to PC
open mao with 7-Zip
extract from DHS3data/mao what you need (hardware.mao, *.zip, *.swk, *.*.hw, software.mao)
Re: OPS FROM MAO FILE
Another way (if you have lab PBX):
- install R3.2 (from R3.2 you have possibility to save OPS to CPU disk)
- restore mao (from R3 PBX)
- save OPS files to CPU disk
- install R3.2 (from R3.2 you have possibility to save OPS to CPU disk)
- restore mao (from R3 PBX)
- save OPS files to CPU disk
- Konstantinos.E
- Alcatel Unleashed Certified Guru
- Posts: 616
- Joined: 12 Jan 2010 04:15
- Location: Honolulu
Re: OPS FROM MAO FILE
thank you vad for your advise..
I made in my lab. after a restoration to an old cpu.
I made in my lab. after a restoration to an old cpu.
Alca_holic