TechTips - How to use USB key
TechTips - How to use USB key
Hello
Here some collect of my tests with USB key to :
- make auto copy to upgrade a switch with usb key
- disaster recovery to make a load of new code when you have a failure in certified and/or working.
Hope it will make your job easier
Cedric
Here some collect of my tests with USB key to :
- make auto copy to upgrade a switch with usb key
- disaster recovery to make a load of new code when you have a failure in certified and/or working.
Hope it will make your job easier
Cedric
You do not have the required permissions to view the files attached to this post.
Re: TechTips - How to use USB key
Hi cedric,
thanks for this docu. It's great.
regards
Silvio
thanks for this docu. It's great.
regards
Silvio
Re: TechTips - How to use USB key
Thanks
I show it for 9000, so for 6850 or 6400, just add the good folder , instead 9000 put your model type.
This feature is very helpful
Rgds
Cedric
I show it for 9000, so for 6850 or 6400, just add the good folder , instead 9000 put your model type.
This feature is very helpful
Rgds
Cedric
Re: TechTips - How to use USB key
I agree with Silvio. Good document Cedric - thanks for sharing it.
Regards,
Benny
Benny
Re: TechTips - How to use USB key
Hi Celdric,
I dont have Alcatel USB.
If i use my USB, do i have to make it bootable first?
I dont have Alcatel USB.
If i use my USB, do i have to make it bootable first?
Re: TechTips - How to use USB key
Hi
No just try to insert it and check if switch recognize it.
No just try to insert it and check if switch recognize it.
Re: TechTips - How to use USB key
Hi
when i use command " usb reset", the switch gives me " (Re)start USB...
USB: scanning bus for devices... 1 USB Devices found"
but when i use " usbboot", it gives me " No boot device", so i think my USB boot is wrong. Do you know how to create an usb boot for 6400 or do u have any documents about it ?
when i use command " usb reset", the switch gives me " (Re)start USB...
USB: scanning bus for devices... 1 USB Devices found"
but when i use " usbboot", it gives me " No boot device", so i think my USB boot is wrong. Do you know how to create an usb boot for 6400 or do u have any documents about it ?
Re: TechTips - How to use USB key
hello
If you have good miniboot for usb driver, i think you have to order a key to alu .
Key must be max 500Mbits.
Try it in another system and check.
Cedric
If you have good miniboot for usb driver, i think you have to order a key to alu .
Key must be max 500Mbits.
Try it in another system and check.
Cedric
Re: TechTips - How to use USB key
Hi Cedric,
could you possibly help?
sysUsbDisasterRecoveryTask: ERROR: /uflash not found
Miniboot is correct for usbboot. My 6850 omniswitch will not boot from USB. any ideas?
usb: 6850/certified/(AOS files)
Formatted FAT32 and 512meg stick
Any suggestions will be greatly recieved...
Kind Regards,
JPing
could you possibly help?
sysUsbDisasterRecoveryTask: ERROR: /uflash not found
Miniboot is correct for usbboot. My 6850 omniswitch will not boot from USB. any ideas?
usb: 6850/certified/(AOS files)
Formatted FAT32 and 512meg stick
Any suggestions will be greatly recieved...
Kind Regards,
JPing