Hello ALL,
I got trap messages via OV:
Slot X Port X port-level, RX:crossedAbove Threshold, RXTX: noChange
Slot X Port X port-level, RX:crossedBelow Threshold, RXTX: noChange
I did not find detail information about these traps.
Could hint, where I can find thresholds for ports ?
I found only threshold for system (entire device).
HealthMonPortTrap
Re: HealthMonPortTrap
There is (afaik) no port specific threshold.
Even while you can configure something for ports using Omnivista it still will only change the global threshold.
Even while you can configure something for ports using Omnivista it still will only change the global threshold.
Re: HealthMonPortTrap
Hey. You've found the answer? I have the same problem.strelok wrote:Hello ALL,
I got trap messages via OV:
Slot X Port X port-level, RX:crossedAbove Threshold, RXTX: noChange
Slot X Port X port-level, RX:crossedBelow Threshold, RXTX: noChange
I did not find detail information about these traps.
Could hint, where I can find thresholds for ports ?
I found only threshold for system (entire device).
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: HealthMonPortTrap
The answer is one post above
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 6
- Joined: 12 May 2022 09:06
Re: HealthMonPortTrap
I also get the same issues while my threshold is set to 80 , You can check that with the below command
show health configuration
i also check in OV that mximum value it achieves is 30 only , i have gone through for 24 hours data , but tsill i am getting alarm in OV.
show health configuration
i also check in OV that mximum value it achieves is 30 only , i have gone through for 24 hours data , but tsill i am getting alarm in OV.
-
- Member
- Posts: 6
- Joined: 12 May 2022 09:06
Re: HealthMonPortTrap
kabalin wrote: ↑01 Nov 2016 12:41Hey. You've found the answer? I have the same problem.strelok wrote:Hello ALL,
I got trap messages via OV:
Slot X Port X port-level, RX:crossedAbove Threshold, RXTX: noChange
Slot X Port X port-level, RX:crossedBelow Threshold, RXTX: noChange
I did not find detail information about these traps.
Could hint, where I can find thresholds for ports ?
I found only threshold for system (entire device).
Have you found the answer now?//
-
- Member
- Posts: 6
- Joined: 12 May 2022 09:06
Re: HealthMonPortTrap
any update by anyone over this