Upgrade NI uboot in os-9800

Post Reply
miobil01
Member
Posts: 2
Joined: 11 Jul 2014 14:30

Upgrade NI uboot in os-9800

Post by miobil01 » 11 Jul 2014 15:15

What is the procedure to upgrade the u-boot of new inserted NI card ( OS9-GNI-C24) in a OS-9800.

Module in slot 11
Model Name: OS9-GNI-C24,
Description: 10-1000 RJ45,
Part Number: 902627-90,
Hardware Revision: E02,
Serial Number: K28Q1031,
Manufacture Date: JUL 16 2009,
Firmware Version: ,
Admin Status: POWER ON,
Operational Status: UP,
Power Consumption: 51,
Power Control Checksum: 0xe38b,
CPU Model Type : Motorola MPC8541 ADS,
MAC Address: 00:e0:b1:c2:fb:26,
ASIC - Physical 1: BCM56504_B2,
FPGA - Physical 1: 0007/00,
UBOOT Version : 6.4.3.479.R01, <----- In Use card whit a current UBOOT
UBOOT-miniboot Version : No Miniboot,
POE SW Version : n/a

Module in slot 12
Model Name: OS9-GNI-C24,
Description: 10-1000 RJ45,
Part Number: 902394-90,
Hardware Revision: C19,
Serial Number: H52Q0028,
Manufacture Date: JAN 10 2008,
Firmware Version: ,
Admin Status: POWER ON,
Operational Status: UP,
Power Consumption: 51,
Power Control Checksum: 0x6bad,
CPU Model Type : Motorola MPC8541E ADS,
MAC Address: 00:e0:b1:88:d7:ae,
ASIC - Physical 1: BCM56504_B2,
FPGA - Physical 1: 0007/00,
UBOOT Version : 6.3.4.265.R01, <----- New card whit a old UBOOT
UBOOT-miniboot Version : No Miniboot,
POE SW Version : n/a

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 981
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Upgrade NI uboot in os-9800

Post by silvio » 13 Jul 2014 03:27

look at page 13.
regards
Silvio
You do not have the required permissions to view the files attached to this post.

miobil01
Member
Posts: 2
Joined: 11 Jul 2014 14:30

Re: Upgrade NI uboot in os-9800

Post by miobil01 » 14 Jul 2014 10:50

Thanks for your reply.

I need to add different 3 NI :
Slot 6 OS9-XNI-U2, 6.1.5.479.R01
Slot 12 OS9-GNI-C24 6.3.4.265.R01
Slot 15 OS9-GNI-U24 6.3.4.265.R01

I will project to do these different thing, do you think that's ok ?
Put the U-Boot and miniBoot files of the présent version in the switch flash
CMD :
"update uboot-miniboot"
Erase uboot files to flash mem
"reload working no rollback-timeout"
"show ni"

Do I miss something ?

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 981
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Upgrade NI uboot in os-9800

Post by silvio » 15 Jul 2014 03:48

Hi,
it should work. Important is to make image update always before the uboot/miniboot update (like written in the RN).
regards
Silvio

minhtri_329a
Member
Posts: 1
Joined: 15 Apr 2016 02:48

Re: Upgrade NI uboot in os-9800

Post by minhtri_329a » 25 Oct 2016 00:15

hi comunity
i wana upgrade the uboot but i can't find uboot file anywhere. :'(
who can help me, plezzzzzz

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 981
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Upgrade NI uboot in os-9800

Post by silvio » 25 Oct 2016 14:15

sometimes there is a special zip-file available with miniboot/uboot and/or fpga. But sometimes this is within a GA-release.
Maybe you will find the wished uboot within an older GA (if this where the first GA where the newer uboot where necessary).
regard
Silvio

Post Reply

Return to “OmniSwitch 9000 / 9000E”