What is the procedure to upgrade the u-boot of new inserted NI card ( OS9-GNI-C24) in a OS-9800.
Module in slot 11
Model Name: OS9-GNI-C24,
Description: 10-1000 RJ45,
Part Number: 902627-90,
Hardware Revision: E02,
Serial Number: K28Q1031,
Manufacture Date: JUL 16 2009,
Firmware Version: ,
Admin Status: POWER ON,
Operational Status: UP,
Power Consumption: 51,
Power Control Checksum: 0xe38b,
CPU Model Type : Motorola MPC8541 ADS,
MAC Address: 00:e0:b1:c2:fb:26,
ASIC - Physical 1: BCM56504_B2,
FPGA - Physical 1: 0007/00,
UBOOT Version : 6.4.3.479.R01, <----- In Use card whit a current UBOOT
UBOOT-miniboot Version : No Miniboot,
POE SW Version : n/a
Module in slot 12
Model Name: OS9-GNI-C24,
Description: 10-1000 RJ45,
Part Number: 902394-90,
Hardware Revision: C19,
Serial Number: H52Q0028,
Manufacture Date: JAN 10 2008,
Firmware Version: ,
Admin Status: POWER ON,
Operational Status: UP,
Power Consumption: 51,
Power Control Checksum: 0x6bad,
CPU Model Type : Motorola MPC8541E ADS,
MAC Address: 00:e0:b1:88:d7:ae,
ASIC - Physical 1: BCM56504_B2,
FPGA - Physical 1: 0007/00,
UBOOT Version : 6.3.4.265.R01, <----- New card whit a old UBOOT
UBOOT-miniboot Version : No Miniboot,
POE SW Version : n/a
Upgrade NI uboot in os-9800
Re: Upgrade NI uboot in os-9800
look at page 13.
regards
Silvio
regards
Silvio
You do not have the required permissions to view the files attached to this post.
Re: Upgrade NI uboot in os-9800
Thanks for your reply.
I need to add different 3 NI :
Slot 6 OS9-XNI-U2, 6.1.5.479.R01
Slot 12 OS9-GNI-C24 6.3.4.265.R01
Slot 15 OS9-GNI-U24 6.3.4.265.R01
I will project to do these different thing, do you think that's ok ?
Put the U-Boot and miniBoot files of the présent version in the switch flash
CMD :
"update uboot-miniboot"
Erase uboot files to flash mem
"reload working no rollback-timeout"
"show ni"
Do I miss something ?
I need to add different 3 NI :
Slot 6 OS9-XNI-U2, 6.1.5.479.R01
Slot 12 OS9-GNI-C24 6.3.4.265.R01
Slot 15 OS9-GNI-U24 6.3.4.265.R01
I will project to do these different thing, do you think that's ok ?
Put the U-Boot and miniBoot files of the présent version in the switch flash
CMD :
"update uboot-miniboot"
Erase uboot files to flash mem
"reload working no rollback-timeout"
"show ni"
Do I miss something ?
Re: Upgrade NI uboot in os-9800
Hi,
it should work. Important is to make image update always before the uboot/miniboot update (like written in the RN).
regards
Silvio
it should work. Important is to make image update always before the uboot/miniboot update (like written in the RN).
regards
Silvio
-
- Member
- Posts: 1
- Joined: 15 Apr 2016 02:48
Re: Upgrade NI uboot in os-9800
hi comunity
i wana upgrade the uboot but i can't find uboot file anywhere. :'(
who can help me, plezzzzzz
i wana upgrade the uboot but i can't find uboot file anywhere. :'(
who can help me, plezzzzzz
Re: Upgrade NI uboot in os-9800
sometimes there is a special zip-file available with miniboot/uboot and/or fpga. But sometimes this is within a GA-release.
Maybe you will find the wished uboot within an older GA (if this where the first GA where the newer uboot where necessary).
regard
Silvio
Maybe you will find the wished uboot within an older GA (if this where the first GA where the newer uboot where necessary).
regard
Silvio