Dynamic gateway configuration

bpquintanilha · Post by **bpquintanilha** » 31 Aug 2016 06:09

Hi there,

i need a setup where traffic with destination 192.168.0.0/16 goes to gateway 192.168.1.1.

All other traffic should be redirected to 192.168.1.2.

I have a 9800E.

Can you guys help me out?

Best regards

Post by **silvio** » 01 Sep 2016 15:00

PBR - policy based routing is the solution.
You will find in the forum and in userguide infos/examples for it (policy action permanent gateway-ip)

regards
Silvio

bpquintanilha · Post by **bpquintanilha** » 17 Apr 2017 05:59

Hi Silvio,

the problem was that traffic was being looped when coming back from the router. I had to create a port group with all ports but the router port than apply to my condition. Built-in port groups were not elegible as the router were in that group.

I guess that the documentation on this subject should be improved.

I got it sorted out, thanks for your help.

Barrykeery · Post by **Barrykeery** » 12 Jul 2019 18:59

the panel legend hows Gateway powerup error...gateway configuration error after i write something to the panel. What causes those errors and how do i fix it? Please help. Thanks

Ryan

Alcatel Unleashed