Dynamic gateway configuration

Post Reply
bpquintanilha
Member
Posts: 2
Joined: 04 Jan 2016 19:25

Dynamic gateway configuration

Post by bpquintanilha » 31 Aug 2016 06:09

Hi there,

i need a setup where traffic with destination 192.168.0.0/16 goes to gateway 192.168.1.1.

All other traffic should be redirected to 192.168.1.2.

I have a 9800E.

Can you guys help me out?

Best regards

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 988
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Dynamic gateway configuration

Post by silvio » 01 Sep 2016 15:00

PBR - policy based routing is the solution.
You will find in the forum and in userguide infos/examples for it (policy action permanent gateway-ip)

regards
Silvio

bpquintanilha
Member
Posts: 2
Joined: 04 Jan 2016 19:25

Re: Dynamic gateway configuration

Post by bpquintanilha » 17 Apr 2017 05:59

Hi Silvio,

the problem was that traffic was being looped when coming back from the router. I had to create a port group with all ports but the router port than apply to my condition. Built-in port groups were not elegible as the router were in that group.

I guess that the documentation on this subject should be improved.

I got it sorted out, thanks for your help.

Post Reply

Return to “OmniSwitch 9000 / 9000E”