Both CMM's stuck at uboot

[1pc0nf1g]

Hello,

I have a 9700 that will not boot past uboot. Getting the error "bad magic number" on startup and when trying to get to miniboot. Is there a good resource/guide for restoring the file system on the flash? I did see a procedure for USB restore, however I cannot use a USB thumbdrive as those are not allowed at the facility I work in.

So far I've tried TFTP boot with no luck. I do have other 9700's available with working CMM's, I thought of trying to flash-synchro off of one of those but I didn't know if that will work or if there's a better way of restoring the switch.

Any help is appreciated.

[devnull]

Please post more output.
If you can access miniboot you can try to recover using X/Zmodem see http://www.alcatelunleashed.com/viewtopic.php?t=19531 should be similar for CMM in 9700 otherwise search board here.

[1pc0nf1g]

I can't get to miniboot.

[Murrow]

I'm getting the same error. Where can I access the output to post it here, Devnull?

[Barrykeery]

Yeah it should be about 14.8 volts ... thanks for the tip ... Ill replace the reg and see what happens from there